Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 709–720 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Dana Spicer Performance Adjustable Shock – 2023594
- Front adjustable gas-charged shock for Jeep Wrangler JK, sold individually
- Hand-built by Walker Evans Racing for Dana Spicer, rebuildable
- 16-position compression adjuster with 250% dampening range
- Part number 2023594, braided stainless remote lines
SKU: D/S2023594 -
Shock Absorbers & Shock Accessories
Dana Spicer Performance Adjustable Rear Shock – 2023595
- Rear adjustable gas-charged shock for Jeep Wrangler JK, sold individually
- Hand-built by Walker Evans Racing for Dana Spicer, rebuildable
- 16-position compression adjuster with 250% range of dampening force
- Part number 2023595, braided stainless remote lines
SKU: D/S2023595 -
Shock Absorbers & Shock Accessories
California Super Trucks 2.0 Reservoir Shock – CSR-6531
- California Super Trucks 2.0 reservoir shock absorber, part number CSTCSR-6531
- Fits the 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks
- Gas charged with a direct-fit application
- Uses bushings rather than heim joints, with the required hardware included
SKU: CSTCSR-6531 -
Shock Absorbers & Shock Accessories
Bilstien 5100 Series Shock Absorber – 24-293105
- Rear Bilstein B8 5100 Series shock absorber, part number BIL24-293105
- Designed for up to a 2 inch rear lift
- Fits the 2004–2006 Jeep Wrangler LJ and the 1997–2006 Wrangler TJ in listed trims
- Collapsed length 12.81 inches, extended length 19.96 inches
- 46 mm smooth body with a zinc-plated finish
SKU: BIL24-293105 -
Shock Absorbers & Shock Accessories
Bilstein OE Replacement Shock Absorber – 19-173580
- Rear Bilstein B4 OE Replacement shock absorber, part number BIL19-173580
- Fits the 2002–2006 Honda CR-V EX, LX and SE models
- Designed to keep the original ride quality
- Black paint finish; sold individually
SKU: BIL19-173580 -
Shock Absorbers & Shock Accessories
Bilstein OE Replacement Series Shock Absorber – 19-293851
- Rear B4 OE Replacement Series shock absorber, part number BIL19-293851
- Fits the 2013–2015 Ford Escape S, SE, SEL and Titanium
- Stem top mount and eyelet bottom mount, OEM body diameter
- Gas charged, direct fit
- Painted black finish
SKU: BIL19-293851 -
Shock Absorbers & Shock Accessories
Bilstein B8 5160 Shock Absorber (Right Rear) – 25-313130
- Rear right B8 5160 Series shock absorber with remote reservoir, part number BIL25-313130
- Fits the 2003–2023 Toyota 4Runner, 2010–2023 Lexus GX460, 2003–2009 Lexus GX470 and 2007–2014 Toyota FJ Cruiser
- Stem top upper mount and eyelet lower mount
- Reservoir with mounts in the box
- 46 mm body diameter
SKU: BIL25-313130 -
Shock Absorbers & Shock Accessories
Bilstein B8 5160 Shock Absorber (Left Rear) – 25-313154
- Rear left B8 5160 Series shock absorber with remote reservoir, part number BIL25-313154
- Fits the 2003–2023 Toyota 4Runner, 2010–2023 Lexus GX460, 2003–2009 Lexus GX470 and 2007–2014 Toyota FJ Cruiser
- Stem top upper mount and eyelet lower mount, 46 mm body diameter
- Remote reservoir with increased oil capacity, reservoir mounts included
- Zinc-plated body; optional billet aluminum reservoir clamp available
SKU: BIL25-313154 -
Shock Absorbers & Shock Accessories
Bilstein B8 5100 Shock Absorber – 24-256759
- Front ride height adjustable B8 5100 Series shock absorber, part number BIL24-256759
- Fits the 2014 Ford F-150 FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT in 4WD configuration.
- 0 to 2.75 inches of front lift with OE springs, depending on application
- Collapsed length 16.91 inches, extended length 22.46 inches
- Zinc-plated 46 mm body with snap-ring grooves
SKU: BIL24-256759 -
Shock Absorbers & Shock Accessories
Bilstein B8 5100 Series Rear Shock – 33-292632
- Rear B8 5100 Series monotube shock absorber, part number BIL33-292632
- Designed for 4-door models with a 2 to 3 inch lift
- Collapsed length 18.33 inches, extended length 29.38 inches
- Eye mounts (12.8 mm), 46 mm smooth non-coilover body
- Zinc-plated body, boot included, no external reservoir, sold individually
SKU: BIL33-292632 -
Shock Absorbers & Shock Accessories
Bilstein B8 5100 Series Front Shock – 33-292625
- Front B8 5100 Series monotube shock absorber, part number BIL33-292625
- Designed for 4-door Wrangler JL models with a 2 to 3 inch lift
- Collapsed length 17.07 inches, extended length 26.88 inches
- Eye mounts (12.8 mm) at the top and bottom, 46 mm smooth non-coilover body
- Zinc-plated body, boot included, no external reservoir, sold individually
SKU: BIL33-292625
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.













