Overview
The Bilstein BIL33-292632 is a rear B8 5100 Series monotube shock absorber for 2018 to 2026 Jeep Wrangler JL models. It fits 2-door and 4-door Wranglers, including the Unlimited, in the trims named.
The collapsed length is 18.33 inches and the extended length is 29.38 inches. It is for a 2 to 3 inch lift. The position is rear, and the body is a 46 mm smooth non-coilover design with a zinc-plated finish. It is a direct-fit option for lifted vehicles and uses the same damping approach as the rest of the range.
Key features
- Rear position
- Monotube design with a velocity-sensitive, digressive piston
- Eye mounts at both ends, 12.8 mm
- Boot included
- Zinc-plated body with no external reservoir
- Direct-fit application for a 2 to 3 inch lift
Rear shock travel and length
Rear shocks on the JL work across a range of suspension movement, from full droop on the trail to full compression over a bump. The collapsed and extended lengths define the travel the shock can use, so a shock that is too short can bottom out and a shock that is too long can top out. Comparing the lengths before fitting is the simplest way to avoid that.
When replacing rear shocks on a lifted Wrangler, check the upper and lower eye mounts for wear, and inspect the boot for tears. Because this shock includes a boot, keeping it intact helps protect the shaft from debris. Rear shocks are often replaced in pairs so the damping feels the same on both sides of the vehicle.
- Compare collapsed and extended lengths before fitting
- Inspect eye mounts for wear
- Check the boot for tears
- Replace rear shocks in pairs
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL33-292632 |
| Series | 5100 Series |
| Location | Rear |
| Shock type | Monotube |
| Charge | Gas charged |
| Collapsed length | 18.33 inches |
| Extended length | 29.38 inches |
| Body | 46 mm ID smooth body, non-coilover |
| Upper and lower mount | Eye, 12.8 mm |
| Reservoir | None |
| Finish | Zinc plated |
| Boot | Included |
| Lift height | 2 to 3 inches |
| Quantity | Sold individually |
Vehicle fitment
It fits 2-door models such as Willys, Willys Sport, Sport, Sport S, Freedom, Islander, Rubicon and 80th Anniversary, and 4-door Unlimited models in Sport, Sahara, Rubicon, High Altitude, Moab, Willys and other trims.
The list names Wrangler JL models only, from 2018 to 2026, so the Gladiator and earlier Wrangler generations are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the collapsed length of 18.33 inches and the extended length of 29.38 inches with the original rear shock before fitting. Confirm that the lift falls within the 2 to 3 inch range.
What’s included
One rear shock absorber with a boot, sold individually.









