Select your vehicle

Bilstein B8 5100 Shock Absorber – 24-256759

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front ride height adjustable B8 5100 Series shock absorber, part number BIL24-256759
  • Fits the 2014 Ford F-150 FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT in 4WD configuration.
  • 0 to 2.75 inches of front lift with OE springs, depending on application
  • Collapsed length 16.91 inches, extended length 22.46 inches
  • Zinc-plated 46 mm body with snap-ring grooves

Description

Overview

The Bilstein BIL24-256759 is a front ride height adjustable B8 5100 Series monotube shock absorber for the 2014 Ford F-150. It fits FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT models in 4WD configuration.

The shock is built for trucks and SUVs with a front OE coilover-style suspension. Multiple snap-ring grooves in the body let the spring seat sit in different positions, providing 0 to 2.75 inches of front lift with OE springs, depending on application.

The monotube body has a 46 mm digressive piston with a self-adjusting deflective disc valve. The design increases wheel travel and improves handling, and it can be used to level a vehicle.

Key features

  • Ride height adjustable through snap-ring grooves in the body
  • 0 to 2.75 inches of front lift with OE springs, depending on application
  • 46 mm digressive piston with a self-adjusting deflective disc valve
  • The valve design increases wheel travel and improves handling.
  • Zinc-plated body

Choosing a lift setting

Ride height adjustable shocks change the front suspension geometry, so the groove you pick affects how the truck sits and how the shock works through its stroke. A higher groove gives the spring seat a different preload, which can change the ride feel and the amount of available travel. Set it once you know the lift you want, then measure both sides to confirm they match.

Sticking with the factory springs keeps the spring rate predictable. Worn bushings, leaking seals or a sagging front end are signs the old shock is past its service life. When replacing the front shocks, replace them as a pair so the left and right sides damp evenly.

  • Measure front ride height before and after the change
  • Inspect the upper and lower mounts for wear
  • Check tire clearance after moving the spring seat

Specifications

Brand Bilstein
Part number BIL24-256759
Series 5100 Series (ride height adjustable)
Location Front
Shock type Monotube
Charge Gas charged
Body diameter 46 mm
Collapsed length 16.91 inches
Extended length 22.46 inches
Lift range 0 to 2.75 inches with OE springs
Top mount OEM
Bottom mount OEM
Finish Zinc plated
Fitment type Direct fit

Vehicle fitment

The shock fits the 2014 Ford F-150 in FX4, King Ranch, Lariat, Limited, Platinum, STX, XL and XLT models, in 4WD configuration.

Only the 2014 model year is covered, and the 4WD drivetrain is part of the fit. Check your truck’s drivetrain and trim before ordering.

Installation notes

The lift depends on which snap-ring groove the spring seat is set in, so choose the groove for the lift you need before fitting, then check the front alignment after the change. Work on a securely supported vehicle.

What’s included

One front shock absorber. Lift requires the vehicle’s OE springs, which are not part of this kit.

Fitment

VehicleYearsTrims
Ford F-1502014FX4, King Ranch, Lariat, Limited, Platinum, STX, XL, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will this shock fit a 2014 F-150 2WD truck?

This shock is for 2014 F-150 trucks with 4WD in the trims named above. Verify your drivetrain and trim before ordering, because the fit covers 4WD configurations.

How much lift does it provide?

Bilstein lists 0 to 2.75 inches of front lift with OE springs, depending on application. The result depends on which snap-ring groove the spring seat is set in.

Does it need new springs?

No new springs are included. The lift uses OE springs, so keep the truck's original front springs or source them separately before fitting.

How often should front shocks be checked?

Check them whenever the truck feels floaty, bounces after bumps or shows fluid on the body. Look for oil streaks on the shock body and inspect the mounts and bushings during an oil change or tire rotation. Early wear often shows up as uneven tire wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon