Overview
The ICON 3.0 Series Remote Reservoir Coilover Shock Kit with CDCV, part number ICO58755, is a front coilover that fits 2007–2021 Toyota Tundra trucks in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail versions. It is designed to increase wheel travel and improve front damping for harder terrain.
Compared with 2.5 inch coilovers, the 3.0 Series adds 50% more piston surface area in the ride zone and 100% more in the bump zone. That adds stability and control at the extremes of off-road use, and it also helps on pavement. The multi-stage hydraulic bump zone increases resistance to bottoming out over the last 40% of travel.
The built-in ride height adjustment gives 1.63 to 3.5 inches of front lift, allowing larger wheel and tire combinations. Eibach coil springs and FK rod end bearings are among the components.
Key features
- Piston area 50% larger in the ride zone than a 2.5 inch coilover.
- Piston area 100% larger in the bump zone.
- Multi-stage hydraulic bump zone for the last 40% of travel.
- Built-in ride height adjustability from 1.63 to 3.5 inches of front lift.
- Eibach coil springs and FK rod end bearings.
Front coilover setup and checks
A front coilover raises or lowers ride height, which changes how the front suspension and steering geometry work. After adjusting height, check the wheel clearance at full lock and under compression, since larger wheel and tire packages need extra room. Alignment is usually checked after a height change.
Front coilovers with bump zones and remote reservoirs work best when the rest of the front end is in good shape. Worn ball joints, tie rod ends and sway bar links can make a new coilover feel loose. Replacing those parts alongside the coilovers keeps the front end tight and the ride consistent.
- Check wheel clearance after each height change
- Inspect the ball joints and tie rod ends
- Look at the sway bar links for wear
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO58755 |
| Position | Front |
| Shock type | Remote reservoir coilover with CDCV |
| Shock body | 3.0 Series |
| Front lift adjustment | 1.63 to 3.5 in |
| Bump zone travel | Last 40% of travel |
| Coil springs | Eibach |
| Rod end bearings | FK |
Vehicle fitment
It fits the 2007–2021 Toyota Tundra across its trim range. Tacoma, 4Runner and the 2022 Tundra are not included.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a direct replacement for the OEM front shocks, so installation is a bolt-on job. Check front lift and wheel clearance after installation, since the adjustable lift changes how the front sits.
What’s included
The coilover kit and its coil springs. Check the hardware against your installation before starting.