Overview
The ICON Suspension 2.0 Aluminum Series Shock Boot Kit (part number ICO614700) protects the shock shaft from dirt, mud and other debris. It is made for ICON 2.0 Aluminum Series shock absorbers and is constructed from a polyurethane material that ICON says is durable and resists corrosion.
The boot keeps the exposed shaft clean, which helps the shock last longer. It is designed for ICON 2.0 Aluminum Series shocks and should be matched to that shock line.
Key features
- Protects the exposed shock shaft
- Blocks dirt, mud and other debris
- Polyurethane construction
- Designed for high durability and corrosion resistance.
- Made for ICON 2.0 Aluminum Series shocks
Polyurethane boots in service
Polyurethane is a common choice for shock boots because it resists tearing and holds its shape through repeated folding. It can stiffen in very cold weather and may need a little extra care when it is installed in the cold, so work the boot onto the shaft slowly and check it has seated fully. Keep the seal area clean before fitting, since grit trapped under the lip will wear both the boot and the shaft.
Pair a boot with the shock it was made for. The kit is matched to a specific shock line, so the boot should be checked against the shock’s shaft diameter and body before work starts. After mud or water crossings, look over the boot for cuts, flattened folds or a lip that has pulled away, and clean the shaft before it goes back into service. A worn boot is usually obvious: the shaft shows oil film, dirt or pitting where it used to be covered.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO614700 |
| Material | Polyurethane |
| For shock series | ICON 2.0 Aluminum Series |
Vehicle fitment
Fitment follows the shock rather than the vehicle. Confirm the shock is a 2.0 Aluminum Series unit, and check fit against your vehicle’s year, model and trim first.
Confirm that the shock is a 2.0 Aluminum Series unit before ordering the kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the boot over the shock shaft before the shock is installed on the vehicle, and check that it sits clear of the shock body and the mount through the full range of travel.
What’s included
One shock boot kit. Verify the package contents against your installation before starting.





