Overview
The ICON 3.0 Series Front Remote Reservoir CDCV Coilover Kit, part number ICO58765, is a front coilover for the Toyota Land Cruiser. It fits the 2007–2011 and 2013–2021 Land Cruiser in Base and Heritage Edition versions. Confirm your year and trim before ordering.
The 3.0 Series is built to increase wheel travel and improve front damping for drivers who take their trucks onto harder terrain. Its piston surface area is 50% larger in the ride zone and 100% larger in the bump zone compared with 2.5 inch coilovers. That added area gives more stability and control at the extremes of off-road use, and it benefits on-road driving too.
The multi-stage hydraulic bump zone is said to increase bottom-out resistance during the last 40% of travel. The built-in ride height adjustment gives 2.25 to 3.5 inches of front lift, which allows for larger and more aggressive wheel and tire combinations. ICON built the coilover as an OEM replacement, with a bolt-on installation, and it uses Eibach coil springs and FK rod end bearings.
The 3.0 Series is an OEM shock replacement with a bolt-on installation. Its Eibach coil springs and FK rod end bearings are part of the kit. Confirm that the springs and bearings supplied match your planned setup before installation begins.
Key features
- Piston area 50% larger in the ride zone.
- Piston area 100% larger in the bump zone.
- Multi-stage hydraulic bump zone for the last 40% of travel.
- Adjustable front lift from 2.25 to 3.5 inches.
- Eibach coil springs and FK rod end bearings.
Things to check
Long-travel front coilovers change how the suspension moves through its range, so look at the whole front end before buying. Wheel travel, bump stop position, brake hose length and steering clearance all affect how a kit feels once it is installed. Matching the kit to your tire size and planned driving keeps those interactions in balance.
A remote reservoir gives the shock more room to cool and keeps damping steadier over long runs, which helps on trail days. The reservoir and its hose need clearance from the wheel, fender and frame, so route them before final tightening. Inspect the reservoir mount and hose after rough trips.
- Check bump stop position after installation
- Confirm reservoir hose routing and clearance
- Recheck steering and brake hose clearance
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO58765 |
| Shock series | 3.0 Coilover Reservoir |
| Position | Front |
| Shock type | Coilover |
| Front lift adjustment | 2.25 to 3.5 in |
| Bump zone travel | Last 40% of travel |
| Coil springs | Eibach |
| Rod end bearings | FK |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits 2007–2011 and 2013–2021 Toyota Land Cruiser models in the Base and Heritage Edition versions. Confirm your model year before ordering, as 2012 models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front 3.0 Series coilover kit with its springs and bearings. Confirm any other hardware you need before starting the installation.


