Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 25–36 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
TeraFlex Falcon SP2 3.5 aDAPT e-Adjust Piggyback Shock Set for 2 -4.5″ Lift – 11-04-35-400-200
Shock Absorbers & Shock AccessoriesTeraFlex Falcon SP2 3.5 aDAPT e-Adjust Piggyback Shock Set for 2 -4.5″ Lift – 11-04-35-400-200
- Falcon SP2 3.5 aDAPT e-Adjust piggyback shock set for 2 to 4.5 inch lift
- Automatic switch from Soft to a preselected Firm setting
- Three-position in-cab switch with Soft, Firm and Auto
- Eight-position dial for manual Firm tuning
- Part number TER11-04-35-400-200
SKU: TER11-04-35-400-200 -
Shock Absorbers & Shock Accessories
TeraFlex Falcon SP2 3.3 Fast Adjust Piggyback Shock Kit – 11-02-33-400-202
Shock Absorbers & Shock AccessoriesTeraFlex Falcon SP2 3.3 Fast Adjust Piggyback Shock Kit – 11-02-33-400-202
- Falcon SP2 3.3 Fast Adjust piggyback kit for 2020–2026 Jeep Wrangler JL Unlimited four-door
- Set of four shocks with a pair of rear roost guards
- Three-position Fast Adjust knob plus an eight-position Custom dial
- Horizontal front piggyback reservoir for tire clearance
- EcoDiesel-specific front shocks with a modified reservoir body
- Part number TER11-02-33-400-202
SKU: TER11-02-33-400-202 -
Shock Absorbers & Shock Accessories
TeraFlex Falcon SP2 2.1 Monotube Shock Set – 14-02-21-400-200
- Falcon SP2 2.1 monotube shock set for Jeep Gladiator, 2020–2026
- Mode Adjust switches between Soft and Performance settings
- Front and rear shocks in one set
- 2.25 inch body diameter
- Part number TER14-02-21-400-200
SKU: TER14-02-21-400-200 -
Shock Absorbers & Shock Accessories
TeraFlex Falcon SP2 2.1 Monotube Shock Kit – 11-02-21-400-200
- Falcon SP2 2.1 monotube shock kit for 2018–2019 Jeep Wrangler JL Unlimited
- Mode Adjust feature switches between Soft and Performance settings
- Eyelet top and eyelet bottom mounts; 2.25 inch body diameter
- Front and rear shocks, optimized for on- and off-road driving
- Part number TER11-02-21-400-200
SKU: TER11-02-21-400-200 -
Shock Absorbers & Shock Accessories
TeraFlex Falcon Series 2.1 Monotube Shock Set (3-3.5″ Lift) – 03-01-21-400-253
Shock Absorbers & Shock AccessoriesTeraFlex Falcon Series 2.1 Monotube Shock Set (3-3.5″ Lift) – 03-01-21-400-253
- Falcon Series 2.1 monotube shock set for 3 to 3.5 inch lift on Wrangler JK
- Front and rear shocks with stem top and eyelet bottom mounts
- Volume Optimized Damping digressive linear valve
- Body diameter 2.25 in, fixed-rate damping
- Fits 2007–2018 Jeep Wrangler JK Unlimited four-door models
- Part number TER03-01-21-400-253
SKU: TER03-01-21-400-253 -
Shock Absorbers & Shock Accessories
TeraFlex Falcon Series 2.1 Monotube Kit – 03-01-21-400-002
- Falcon Series 2.1 monotube shock kit for 2007–2018 Jeep Wrangler JK Unlimited
- Single-tube design with an oil and gas separator
- 6061 aluminum hard-anodized body
- Red Line full synthetic shock oil
- Part number TER03-01-21-400-002
SKU: TER03-01-21-400-002 -
Shock Absorbers & Shock Accessories
TeraFlex 5 – 6 Inch Lift Falcon Series 3.3 Fast Adjust Piggyback Reservoir Shock Absorber Set – 03-01-33-400-406
Shock Absorbers & Shock AccessoriesTeraFlex 5 – 6 Inch Lift Falcon Series 3.3 Fast Adjust Piggyback Reservoir Shock Absorber Set – 03-01-33-400-406
- Front and rear piggyback shock set for a 5 to 6 inch lift on Wrangler JK and JKU
- Three-position Fast Adjust knob with an eight-position micro adjust dial
- Volume Optimized Damping valve design
- Fits 2007–2018 Jeep Wrangler JK Unlimited four-door models
- Part number TER03-01-33-400-406
SKU: TER03-01-33-400-406 -
Shock Absorbers & Shock Accessories
TeraFlex 3 – 4.5 Inch LIft Falcon Series 3.3 Fast Adjust Piggyback Shock Absorber Kit – 03-01-33-400-253
Shock Absorbers & Shock AccessoriesTeraFlex 3 – 4.5 Inch LIft Falcon Series 3.3 Fast Adjust Piggyback Shock Absorber Kit – 03-01-33-400-253
- Falcon Series 3.3 Fast Adjust piggyback shock for 3 to 4.5 inch lift on Wrangler JK
- Fits 2007–2018 Jeep Wrangler JK Unlimited four-door models
- Corner-specific piggyback reservoir design
- Horizontal front reservoir for tire clearance during articulation
- Outboard mounting for lifted vehicles with raised track bar brackets
- Part number TER03-01-33-400-253
SKU: TER03-01-33-400-253 -
Shock Absorbers & Shock Accessories
TeraFlex 3 – 4.5 Inch Lift Falcon Series 3.3 Fast Adjust Piggyback Shock Absorber Kit – 02-01-33-400-253
Shock Absorbers & Shock AccessoriesTeraFlex 3 – 4.5 Inch Lift Falcon Series 3.3 Fast Adjust Piggyback Shock Absorber Kit – 02-01-33-400-253
- Falcon Series 3.3 Fast Adjust piggyback shock for 3 to 4.5 inch lift on Wrangler JK
- Fits 2007–2018 Jeep Wrangler JK two-door models
- Corner-specific piggyback reservoir for front and rear
- Horizontal front reservoir for tire clearance during articulation
- Outboard mounting for lifted vehicles with raised track bar brackets
- Part number TER02-01-33-400-253
SKU: TER02-01-33-400-253 -
Shock Absorber Extension
TeraFlex 2-2.5″ Lift Shock Extension Bracket Kit (Front and Rear) – 1985200
Shock Absorber ExtensionTeraFlex 2-2.5″ Lift Shock Extension Bracket Kit (Front and Rear) – 1985200
- Front and rear shock extension bracket kit for 2 to 2.5 inch lift
- Fits 2018–2021 Jeep Wrangler JL two-door and four-door models
- Pair of 2 inch front shock extensions and pair of 2 inch rear shock extensions
- All necessary hardware included
- Part number TER1985200
SKU: TER1985200 -
-
Shock Absorbers & Shock Accessories
Skyjacker Softride Nitro Shock Absorber – N8082
- Softride Nitro twin tube shock sold as each
- 150 PSI nitrogen gas charge
- Bonded iron piston and chromed piston rod
- Red polyurethane bushings and red boot included
- Fits 1994–1998 Chevrolet S10 and GMC Sonoma
SKU: SKYN8082
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.






