Overview
The TeraFlex 2 to 2.5 inch lift shock extension bracket kit, part number TER1985200, is made for 2018–2021 Jeep Wrangler JL models with a 2 to 2.5 inch lift. It adds front and rear shock extensions to factory-length shock absorbers so the effective shock length keeps up with the lifted suspension.
The brackets bolt to the stock shocks and extend their effective length, keeping the extended and collapsed lengths close to what the truck was designed for. The kit fits JL and JLU Wrangler models in both two-door and four-door form and includes the hardware needed to install it.
Key features
- Front and rear shock extension brackets
- 2 inch front shock extensions, sold as a pair
- 2 inch rear shock extensions, sold as a pair
- Bolts to factory-length stock shocks
- All necessary hardware included
Why shock length matters
When a suspension is lifted, the wheels move farther from the body, and a factory-length shock can run out of travel at full droop or reach its limit near full compression. Extending the shock’s effective length helps it keep working through its normal range, which affects ride control and the feel of the truck on uneven ground. Keeping the shock within its designed travel also reduces the chance of the bump stops or the shock body being loaded in ways they were not made for.
Before installing, look over the stock shock mounts, the brake lines and the wiring near the front and rear shocks, since the new brackets change how the shock sits. Check that all hardware is tight after the first few drives and recheck it after off-road use. Shock extensions also make the ride height and the shock angle more important, so measure the lift after the kit is in place.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1985200 |
| Lift height | 2-2.5 in. |
| Front extensions | 2 in., pair |
| Rear extensions | 2 in., pair |
| Hardware | All necessary hardware included |
| Fitment | Direct fit |
Vehicle fitment
The kit is for the 2018–2021 Jeep Wrangler (JL) in two-door Rubicon, Sport and Sport S models and four-door Unlimited Rubicon, Sahara, Sport and Sport S models. It is intended for a 2 to 2.5 inch lift.
The list covers the JL generation from 2018 to 2021 only, so the 2022 Wrangler and the earlier JK and TJ models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets bolt onto the stock shocks, so no new shocks are needed. Check the shock length and the ride height after installation, as the shock extensions are sized for the lift range.
What’s included
One pair of 2 inch front shock extensions, one pair of 2 inch rear shock extensions, and all necessary hardware.






