Select your vehicle

TeraFlex Falcon Series 2.1 Monotube Shock Set (3-3.5″ Lift) – 03-01-21-400-253

TeraFlex

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Falcon Series 2.1 monotube shock set for 3 to 3.5 inch lift on Wrangler JK
  • Front and rear shocks with stem top and eyelet bottom mounts
  • Volume Optimized Damping digressive linear valve
  • Body diameter 2.25 in, fixed-rate damping
  • Fits 2007–2018 Jeep Wrangler JK Unlimited four-door models
  • Part number TER03-01-21-400-253

Description

Overview

The TeraFlex Falcon Series 2.1 monotube shock set, part number TER03-01-21-400-253, is a front and rear shock set for 2007–2018 Jeep Wrangler (JK) Unlimited four-door models with a 3 to 3.5 inch lift. It has a stem top mount and an eyelet bottom mount and a 2.25 inch body diameter, and it is a direct fit.

The Series 2.1 shocks are fixed-rate units, tuned for both on-road and off-road driving. The set uses a Volume Optimized Damping valve, a digressive linear design that ramps up damping quickly at low speed. This improves feedback on rough ground and helps control bottoming out at full compression over uneven terrain. The stem top mount and eyelet bottom mount should be checked against the upper bracket before ordering. The set is for the four-door Unlimited.

Key features

  • Front and rear monotube shock set
  • Stem top mount and eyelet bottom mount
  • 2.25 inch body diameter
  • Fixed-rate damping optimized for on- and off-road driving
  • Volume Optimized Damping valve
  • Hydraulic operation

When fixed damping fits

Fixed-rate shocks have one damping curve, so the ride is the same whether the truck is on the highway or on a trail. That simplicity suits drivers who want predictable behavior without adjusting knobs. When a truck carries heavy gear or runs larger tires, a fixed-rate shock may feel firmer or softer than expected, and a different damping setup may be needed.

Monotube bodies are designed to dissipate heat from the damping oil during long descents, but they still need protection from debris. Check the body for dents, the shaft for scoring, and the seal area for oil. Rubber bushings at each mount and the stem top hardware should be inspected for cracking, since these parts control how the shock moves and wear with time.

Since the set is installed front and rear, replace both shocks together when wear is found, so the truck’s handling stays balanced.

Specifications

Brand TeraFlex
Part number TER03-01-21-400-253
Product line Falcon Series 2.1
Shock type Monotube
Location Front and rear
Lift height 3-3.5 in.
Top mount Stem top
Bottom mount Eyelet
Body diameter 2.25 in
Damping Fixed rate
Fitment Direct fit

Vehicle fitment

The set fits the 2007–2018 Jeep Wrangler (JK) Unlimited four-door models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions. It is sized for a 3 to 3.5 inch lift.

The list covers the four-door JK Unlimited only, so two-door Wranglers and the JL and Gladiator models are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the set includes front and rear shocks, install both corners together. Check the stem top and eyelet bottom mounts against the brackets on your truck before ordering.

What’s included

A front and rear set of Falcon Series 2.1 monotube shocks, part number TER03-01-21-400-253.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–2018Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the TeraFlex TER03-01-21-400-253 fit a two-door Jeep Wrangler JK?

No. This set fits the four-door Unlimited JK only. Two-door Wranglers are not included, so confirm your vehicle's year, model and trim before ordering.

What lift height is the set built for?

It is built for a 3 to 3.5 inch lift on the Wrangler JK Unlimited. The set has a stem top mount and an eyelet bottom mount.

Are the shocks adjustable?

No. The Series 2.1 shocks are fixed-rate units, so damping is not adjusted with a knob. The Volume Optimized Damping valve controls damping across shaft speeds.

What is the body diameter?

The body diameter is 2.25 inches. The set is a monotube design, and the front and rear shocks are supplied together.

How can I tell if these shocks need replacing?

Look for oil on the body, a bouncy ride after bumps, uneven tire wear, or a clunk at the mounts. If any of these appear, have the front and rear shocks inspected and replace them as a pair when wear is found.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon