Overview
The TeraFlex Falcon SP2 3.3 Fast Adjust piggyback shock kit, part number TER11-02-33-400-202, is a set of four hydraulic piggyback shocks for 2020–2026 Jeep Wrangler (JL) Unlimited four-door models, including the EcoDiesel version. The kit includes a pair of rear roost guards and all necessary hardware. The top mount is a stem and the bottom mount is an eyelet.
The damping is adjusted with a three-position Fast Adjust knob with Soft, Custom and Firm settings. The Custom setting adds an eight-position dial for finer tuning. The front shock’s horizontal piggyback reservoir adds tire clearance, and the piggyback design increases oil and gas capacity to help reduce heat. The reservoir design flows six times more oil than restrictive reservoir hose designs.
Key features
- Three-position Fast Adjust knob with Soft, Custom and Firm settings
- Eight-position dial for the Custom setting
- Piggyback reservoir for added oil and gas capacity
- Front lower offset eyelet design for body-to-frame clearance during articulation
- Rear roost guards to protect the shock shafts from rocks
- Rear shocks clear the DEF tank and exhaust while keeping full travel
Piggyback shocks and heat
Piggyback shocks carry their oil in a separate reservoir, which gives the damping more room to cool between hard runs. On a heavy vehicle that works through long grades or sandy sections, that extra oil volume helps the shock keep its feel. The reservoir also means the body is a little larger, so tire clearance and the path of the hoses should be checked during installation.
The rear roost guards protect the shock shafts from rocks thrown by the tires, which is a common cause of damage on trail trucks. Check the reservoir hoses and fittings at each service, and look for seepage at the hose ends or cracks in the reservoir body. Confirm the lift height for your truck before ordering.
- Check reservoir hoses for rubbing or chafing
- Inspect the roost guards for cracks after trail use
- Keep the Fast Adjust knob clean and dry
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER11-02-33-400-202 |
| Product line | Falcon SP2 3.3 Fast Adjust |
| Shock type | Piggyback |
| Location | Front and rear |
| Top mount | Stem |
| Bottom mount | Eyelet |
| Lift height | Shown as 24.5 in.; confirm with TeraFlex |
| Kit contents | Set of 4 shocks, pair of rear roost guards, all necessary hardware |
| Damping | 3-position Fast Adjust knob; 8-position Custom dial |
| Operation | Hydraulic |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Wrangler (JL) Unlimited four-door models in its 80th Anniversary, Freedom, High Altitude, Islander, Rubicon, Sahara, Sahara Altitude, Sport, Sport Altitude, Sport S, Willys and Willys Sport versions. It is designed for the Wrangler Unlimited EcoDiesel, with EcoDiesel-specific front shocks.
The list covers the four-door JL Unlimited only, so two-door Wranglers and the 2018 and 2019 JL models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit’s rear shocks clear the DEF tank and exhaust on the EcoDiesel. Confirm the lift height with TeraFlex before ordering, because the lift figure shown for this kit is unusually high and should be checked against your truck.
What’s included
A set of four Falcon SP2 3.3 Fast Adjust piggyback shocks, a pair of rear roost guards, and all necessary hardware.








