Overview
The TeraFlex Falcon Series 3.3 Fast Adjust piggyback shock, part number TER02-01-33-400-253, is a hydraulic reservoir shock for 2007–2018 Jeep Wrangler (JK) two-door models. It is built for a 3 to 4.5 inch lift and is a direct fit for those trucks.
The Falcon Series 3 piggyback shocks are corner-specific, so the front and rear units are built for their own positions rather than adapted from a universal design. The front shock uses a horizontal piggyback reservoir that increases clearance for large tires during articulation and turning. An offset upper stud moves the shock body away from the frame. The 3 to 4.5 inch lift range is the figure to match before ordering.
Key features
- Piggyback reservoir design with separate oil and gas capacity
- Front reservoir positioned horizontally for tire clearance
- Offset upper stud on the front unit for body-to-frame clearance
- Rear body and reservoir sit low to help protect the shaft from rock strikes
- Outboard mounting for lifted vehicles with raised track bar brackets
- Hydraulic shock design
Piggyback shock care
A piggyback shock keeps its reservoir separate from the main body, which gives the damping oil and gas more room to stay cool and steady during long off-road runs. Over time, the seals on both the body and the reservoir hose can wear, so look for oil on the outside of either part. Hose fittings and the reservoir mount should be checked at each service, since a loose mount can rub on the frame or tire.
Because the front reservoir sits horizontally, check its clearance to the tire and the inner fender at full steering lock and at full suspension travel. Keep the front and rear shocks matched in type and position, and when one shock is replaced, consider whether the other has similar wear. Shocks that bounce repeatedly over a single bump, or that feel soft on the highway, usually need inspection.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER02-01-33-400-253 |
| Product line | Falcon Series 3.3 Fast Adjust |
| Shock type | Piggyback reservoir |
| Lift height | 3-4.5 in. |
| Operation | Hydraulic |
| Fitment | Direct fit |
Vehicle fitment
The shock fits 2007–2018 Jeep Wrangler (JK) two-door models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions. It is sized for a 3 to 4.5 inch lift.
The list covers the two-door JK only, so four-door Unlimited models and the 2018 and newer JL Wranglers are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front unit’s offset upper stud and horizontal reservoir are part of the fit, so match the front and rear positions when installing. Check the track bar bracket on a lifted truck, because the outboard mounting is designed for raised brackets.
What’s included
One Falcon Series 3.3 Fast Adjust piggyback shock, part number TER02-01-33-400-253.











