Overview
The TeraFlex Falcon SP2 2.1 monotube shock set, part number TER14-02-21-400-200, is a front and rear set for 2020–2026 Jeep Gladiator models. The shocks are monotube units with a 2.25 inch body diameter, and TeraFlex lists them as direct-fit.
The SP2 Mode Adjust lets the driver tune compression and rebound between Soft and Performance settings. The SP2 2.1 shocks are optimized for on- and off-road driving and suit daily-driven Jeeps as well as trail use, giving stability, ride quality and comfort on the road along with performance and handling off-road.
Key features
- Front and rear monotube shock set
- Mode Adjust for Soft or Performance compression and rebound
- 2.25 inch body diameter
- Optimized for on- and off-road driving.
- Hydraulic operation
Mode settings and daily use
A mode-adjustable shock lets the driver match damping to the surface and the job. Soft settings generally feel more compliant on paved roads and washboard gravel, while a Performance setting firms the response for quicker input on rough trails or when the truck is loaded. Choose a setting before the drive, since changing it on the trail is not always practical.
Monotube shocks are generally easier to service than some other designs, but the seals, the piston rod and the mounts still wear. Check the rod for pitting or scoring, look for oil on the body, and confirm the bushings are not cracked. Because the front and rear shocks work together, replace them as a set when one shows wear, so the Gladiator’s handling stays balanced.
When a lift or larger tires are added, the shock length and mounting angles change, so confirm the mounts and the mode setting after the change and recheck the shocks after the first off-road outing.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER14-02-21-400-200 |
| Product line | Falcon SP2 2.1 |
| Shock type | Monotube |
| Location | Front and rear |
| Body diameter | 2.25 in |
| Mode settings | Soft or Performance |
| Operation | Hydraulic |
| Fitment | Direct fit |
Vehicle fitment
The set fits the 2020–2026 Jeep Gladiator in Launch Edition, Overland, Rubicon, Sport and Sport S models.
The list covers the 2020 to 2026 Gladiator only, so the Wrangler JL and JK models and earlier Gladiators are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the Mode Adjust to the Soft or Performance position before fitting, and check the mounting points against your existing shocks. Install the front and rear shocks together.
What’s included
A front and rear set of Falcon SP2 2.1 monotube shocks, part number TER14-02-21-400-200.








