Select your vehicle

Showing 13–24 of 32 resultsSorted by popularity

What a complete axle includes

A complete axle assembly arrives with the housing, axle shafts, gears and differential already installed, which saves the setup work of a bare housing. Many include a traction device, brake components and a bolt pattern ready to bolt on. Some listings are individual parts of the assembly, such as a Dana 44 AdvanTEK axle shaft, but most are complete front or rear units for a specific application.

Key specifications

  • Axle model: Dana 44 and Dana 60 are common. A Dana 60 is stronger, usually chosen for larger tires and heavier use.
  • Gear ratio: numbers like 4.10, 4.56, 4.88, 5.13 or 5.38 should match tire size and engine power. Front and rear should be the same.
  • Traction device: open, limited-slip such as Detroit True Trac, or a locker such as the Eaton E-Locker or ARB Air Locker.
  • Spline count: 30 or 35 splines indicate shaft strength.
  • Wheel bolt pattern and brakes: 5 on 4.5 inches or 8 on 6.5 inches, plus drum or disc.

Housing and vehicle compatibility

Assemblies are made for specific housings and track widths, such as TJ, JK, JL and Gladiator versions, and front axles differ in design from rear axles. The width, spring perches, control arm brackets and steering mounts must match your suspension, and some units require modification or additional parts. Check the notes in each listing for housing type and model years, and confirm fitment for your exact year, make and model.

Installation and safety

An axle swap affects brakes, steering, suspension and driveline angles, so it is best done by an experienced installer. Check pinion angle, driveshaft length and brake line fit. Fill with the gear oil recommended by the axle manufacturer, follow break-in instructions and torque all fasteners to specification. Changing gear ratio and tire size together can also affect speedometer calibration and the transmission's operation, which a shop can help address.

Plan for supporting items as well, including brake lines, a driveshaft of suitable length, wheels that match the bolt pattern, and possibly a steering stabilizer or track bar adjustments. Budget time for a test drive and recheck of all bolts afterward.

Materials and construction

Axle housings are built from steel tube with welded or cast center sections, and the quality of the welds and tubing determines how well the housing resists bending under load. Axle shafts are heat-treated alloy steel, with higher spline counts such as 35 splines carrying more torque than 30. Locker and differential choices matter: an air locker needs an air source and a compressor, an electric locker needs a wiring harness and switch, and a limited-slip unit works without driver input. Disc brake upgrades, as noted for some assemblies, replace drums with rotors and calipers for stronger stopping.

Confirming fitment

Compare the housing width, measured from wheel mounting face to wheel mounting face, with your current axle, since a different width changes the track and wheel clearance. Check the spring perch spacing, shock mounts, control arm brackets and the steering linkage layout. Look at the pinion diameter and driveshaft yoke type, which determine whether your existing driveshaft will fit. Some listings specify bolt patterns like 8 on 6.5 inches, which may not match the stock wheels.

Popular Complete Axle Assemblies brands

Complete Axle Assemblies FAQ

What is the difference between a Dana 44 and a Dana 60?

The Dana 60 has a larger ring gear and heavier construction, so it handles larger tires and harder use. The Dana 44 is lighter and common in many Jeeps. Choose based on weight, tires and power.

How do I choose a gear ratio for a complete axle?

Match it to tire diameter, engine power and use. Larger tires usually need numerically higher ratios, such as 4.88 or 5.13, to restore performance. Front and rear must match.

What is the difference between a locker and a limited-slip differential?

A limited-slip differential biases torque toward the wheel with traction but still allows some difference between wheels. A locker forces both wheels to turn together when engaged, or all the time, depending on type.

Will a complete axle bolt into my vehicle?

Only if the housing, spring perches, control arm mounts and track width match. Many swaps require modification. Confirm fitment for your exact year, make and model with the manufacturer.