Overview
The Currie RockJock 60 front axle housing, part CE-KF6301E51, is a complete high-pinion front axle with an Eaton E-Locker and a 5.13 ratio, fitting the 2007–2017 Jeep Wrangler (JK).
The RockJock 60 uses Currie’s high clearance radius bottom center section, which lets the axle slide over obstacles. The housing has a thick reinforced center section, forged knuckles, 3-inch diameter axle tubes and 35-spline axles, built for strength.
The housing offers high ground clearance for a 60 class axle, measured with its integrated AR400 hardened steel skid plate in place. The skid plate is designed to resist deformation and gouging, and a rounded radius rather than a sharp edge helps the axle clear obstacles.
Key features
- Eaton E-Locker with 5.13 ratio
- High-pinion radius bottom center section with thicker walls and webbing
- 35-spline 4340 chromoly inner and outer axle shafts with 1350 U-joint
- Integrated AR400 hardened steel skid plate
- Johnny Joint control arm mounts for upper articulation
- Warn premium 35-spline locking hubs and 13.250-inch vented rotors
- Reuses the stock JK calipers
Choosing a front axle upgrade
A front axle carries steering, braking and drive loads, so an upgrade affects more than off-road strength. When you swap in a complete housing, the new gear ratio, locker and axle shafts all work together with the transfer case and driveshafts. Matching the ratio to your tire size and driving style keeps engine speed comfortable on the road and gives the locker useful work on the trail.
Locking differentials change how the axle behaves in low traction. An E-Locker engages on demand, so the axle stays open on pavement and locks when needed, which suits a daily-driven Jeep. Steering geometry and driveline angles often need re-checking after a larger lift or tire change, and joints and bushings should be inspected at the same time.
- Check U-joints and driveline angles after installation
- Inspect tie rods and steering stops for clearance
- Re-torque axle and bracket bolts after the first drives
- Keep the differential fluid level checked
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-KF6301E51 |
| UPC | 817783008778 |
| Axle position | Front |
| Housing | RockJock 60, nodular-iron high-pinion radius bottom center section |
| Ratio and locker | 5.13, Eaton E-Locker |
| Bolt pattern | 5 x 5.5 inch with 1/2-inch studs |
| Wheel mounting surface | 68.750 inches WMS |
| Axle tubes | 3-inch diameter, .375 wall DOM |
| Axle shafts | 35 spline (1.5-inch diameter), 4340 chromoly |
| Knuckles | Heavy duty forged 1-ton, high steer arm |
| Brakes | 13.250-inch vented rotors, zinc plated caliper brackets |
| Maximum tire size | 37 inches |
Vehicle fitment
It fits the 2007–2017 Jeep Wrangler (JK), in both standard and Unlimited body styles.
Coverage ends at 2017, so 2018 and later Wrangler JK years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The housing is a complete front axle assembly, so the existing axle is removed as a whole. JK tone rings are installed for ABS and ESP retention, and the control arm mounts use Johnny Joints with 1/2-inch greasable bolts. Check the alignment and driveline angles after installation, since a new axle changes the suspension geometry.
What’s included
The package includes the complete front axle assembly, Warn hubs and the AR400 skid plate. The assembly reuses the stock JK calipers. Check the package contents, including fill plug and gasket needs, against your installation before starting.











