Overview
The Dynatrac HardCore ProRock 60/60 axle set, part JKHC-3X3002-I, is a front and rear pair with Eaton E-Lockers and a 5.38 ratio. It fits the 2007–2017 Jeep Wrangler (JK).
The set is designed for JK owners running tires up to 40 inches in diameter, with drivetrain parts sized to match. It is an alternative to a pair of Ultimate Dana 60 (UD60) axles.
The ProRock 60 center section is a nodular-iron, high-pinion design with more ground clearance than a factory Dana 44. It uses a dual-sump high volume oiling system to keep the outer pinion bearing lubricated.
Key features
- Eaton E-Lockers in both axles
- 5.38 ratio
- ProRock nodular-iron high-pinion 60 center section
- Dual-sump high volume oiling system
- U.S.-made, forged and double heat-treated 1480 35-spline axle shafts
- Dynatrac HD ball joints and tie rod, with a 4140 heat-treated steering arm
- Rear axle with 14-inch brake upgrade and dual-piston calipers
- Mechanical parking brake with adapters for the stock JK cable
Gearing and tire size
Tire diameter changes the effective gearing of any axle set. Larger tires turn the axles more slowly for each mile traveled, which lowers the effective ratio and makes low-speed crawling harder on the drivetrain. Matching the ratio to the tire size is one of the first things to plan when running big tires on a Wrangler.
Lockers change how the load is shared, so their engagement should be checked after any gear change. Eaton E-Lockers respond to the rear and front axles differently when the vehicle is in low range. Check the differential fluid after the first few trail runs and look for changes in noise.
- Match the ratio to the planned tire diameter
- Check locker engagement after any gear change
- Inspect differential fluid after the first trail runs
- Re-check wheel bolts and torque after the first drives
Specifications
| Brand | Dynatrac |
|---|---|
| Part number | JKHC-3X3002-I |
| UPC | 700008313461 |
| Product type | Front and rear axle set |
| Ratio | 5.38 |
| Locker | Eaton E-Locker, both axles |
| Axle shafts | 1480, 35 spline, forged and double heat-treated, made in the U.S. |
| Axle width | 68.5 inches, front and rear |
| Wheel bolt pattern | 8 on 6.5 inch |
| Maximum tire diameter | 40 inches |
Vehicle fitment
It is a direct fit for the 2007–2017 Jeep Wrangler (JK) in both standard and Unlimited body styles.
2018 and later Wrangler JK years and other Wrangler generations are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The rear axle includes a mechanical parking brake with adapters for the stock JK parking brake cable. Both axles are 68.5 inches wide and use the 8 on 6.5-inch pattern, so the wheels need an 8 on 6.5-inch bolt pattern.
What’s included
The set includes the front and rear axles, with a 14-inch rear brake upgrade and mechanical parking brake adapters for the stock JK cable.













