Overview
The Currie RockJock 60 one-ton front end unit, part TJ-RJIIIF1, is a bolt-in front end package for the Jeep TJ Wrangler and LJ Unlimited. It covers the 1997–2006 Wrangler (TJ) and the 2004–2006 Wrangler (LJ).
The unit includes a complete housing with a 65-45-12 ductile iron center section, an AR400 heat treated bottom skid plate, 3-inch diameter steel tubes, one-ton inner knuckles and a 5/16-inch thick diff cover. The center section is designed for high ground clearance.
The axle shafts are 4340, 35-spline, with Spicer 1480 U-joints. The outer assemblies have one-ton outer knuckles with a Currie upper steering arm and ball joints, one-ton unit bearings, a 5 on 5 1/2-inch wheel bolt pattern with 1/2-inch studs, 13.25-inch vented rotors and Jeep JK calipers.
Key features
- Complete one-ton 60 front end package with housing and steering
- 65-45-12 ductile iron center section with AR400 bottom skid plate
- 4340 35-spline inner and outer axle shafts with Spicer 1480 U-joints
- Johnny Joint upper control arm mounts and an adjustable trac bar
- Choice of Warn premium manual locking hubs or Currie drive flanges
- Heavy duty 4130 chrome moly tie rod and drag link tubes
- Jeep JK calipers with zinc plated caliper brackets
Front axle setup notes
A one-ton front axle adds weight and changes how the steering responds, so the whole front end should be checked as a set. Steering components, tie rod and drag link angles, and the trac bar all work together. After a build, look at alignment, toe and caster before long trips, since a wider track and heavier knuckles can shift those settings.
Tire and wheel choice matters just as much. Wheels with the right backspacing keep tires clear of the suspension at full lock and during articulation. Grease fittings, hub bearing preload and joint condition should be checked regularly, because heavy front axles put more load on hubs and joints.
- Check ball joint play after the first trail runs
- Inspect hub bearing preload at each oil change
- Recheck steering stop clearance after tire changes
Specifications
| Brand | Currie |
|---|---|
| Part number | TJ-RJIIIF1 |
| UPC | 700008420351 |
| Axle position | Front |
| Housing | 97-06 Jeep TJ Dana 60, 65-45-12 ductile iron center section, 3-inch steel tubes |
| Axle shafts | 4340, 35 spline |
| U-joints | Spicer 1480 |
| Wheel bolt pattern | 5 on 5.5 inch with 1/2-inch studs |
| Rotors | 13.25-inch vented |
| Diff cover | 5/16-inch thick steel |
| Overall width | 64 inch |
| Wheel requirement | 17-inch wheels |
Vehicle fitment
The unit fits the 1997–2006 Jeep Wrangler (TJ) and the 2004–2006 Jeep Wrangler (LJ).
Before ordering, match the unit to your vehicle’s year, model and trim.
Installation notes
The unit is 64 inches wide and needs 17-inch wheels. Completing it requires a high-pinion 60 ring and pinion gear set, a 35-spline Dana 60 carrier, a center section bearing with a setup kit and the labor to set it up. Installation instructions and hardware are included.
What’s included
The unit includes the steering, trac bar, relocation brackets and hardware. The housing is bare metal, and the other parts are finished in semi-gloss black powder coat or zinc plating. Assembly labor is included.









