Overview
The Dana Spicer Ultimate Dana 60 front axle assembly, part 10005778, is a 4.88 ratio front axle and a direct bolt-in fit for the 2007–2017 Jeep Wrangler (JK).
It has a 10-inch ring gear and 4.88 ring and pinion with a factory electric selectable locker. The axle is built in the United States, and its housing is a Dana 60 with a 3-1/2 inch .370 wall steel tube.
It also has SPL-70 U-joints, 4340 chromoly 35-spline axle shafts, serviceable wheel bearings and 35-spline Warn locking hubs. Aftermarket wheels and driveshaft modifications are needed for installation.
Key features
- U.S.-made 10-inch Dana 60 front axle
- 4.88 ring and pinion ratio
- Factory electric selectable locker
- 4340 chromoly 35-spline axle shafts
- SPL-70 U-joints and 1350 pinion yoke
- Serviceable wheel bearings and 35-spline Warn locking hubs
- 14-inch dual piston disc brakes with plug and play ABS
Driveline and wheel fit
A Dana 60 front axle carries heavy loads, so it pairs well with a driveline that has been checked for angles and balance. Joint angles and driveshaft length change when the axle is swapped, so measure before the new axle goes in. The SPL-70 U-joints help keep that driveline stable under load.
Locking hubs and an electric selectable locker change how the axle is used off road. Make sure the locker switch wiring and hub engagement are working before the first trail outing, and re-check hub function after the first few trail runs. Keep the axle housing filled to its correct level and inspect the seals for leaks regularly. Wheel bearings can be serviced, so check their play at each tire rotation.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 10005778 |
| UPC | 23913340162 |
| Axle position | Front |
| Ring and pinion | 10-inch, 4.88 ratio |
| Housing | Dana 60, 3-1/2 inch tube with .370 wall, nodular iron cover |
| Axle shafts | 4340 chromoly, 35 spline |
| Locker | Factory electric selectable |
| Brakes | 14-inch dual piston disc |
| Wheel bolt pattern | 8 on 6.5 inch |
Vehicle fitment
Its fit is for the 2007–2017 Jeep Wrangler (JK). Confirm fit for your vehicle’s year, model and trim before ordering, since TJ, LJ and JL Wranglers are not covered here.
Check that your vehicle is a 2007–2017 Jeep Wrangler (JK) before ordering the axle.
Installation notes
Aftermarket wheels are needed to match the 8 on 6.5-inch bolt pattern, and the driveline will need modifications to fit the new axle. Complete both before the axle is installed.
What’s included
This is a complete front axle assembly. Check the delivered parts against your installation plan before starting work.














