Overview
The Go Rhino BR10 front bumper winch tray is a mounting tray that bolts directly onto the vehicle frame as the first piece of a two-piece bumper installation, and it is required for installing the BR10 front bumper.
The winch tray goes on the frame first and the bumper follows, which keeps the BR10 bumper install straightforward. Match the tray to the BR10 bumper you are installing, and make sure the year, model and trim fit your truck before buying.
Key features
- Front bumper winch tray for the BR10 bumper
- Required for front bumper installation
- Bolts directly onto the vehicle frame
- Part of a two-piece bumper installation
- Direct fit listing
Frame prep and bolt checks
A winch tray is a load path between the frame and the bumper, so the frame rails under it matter as much as the tray itself. Before mounting, clean the contact surfaces, look for rust or bent metal on the rails, and confirm that bolt holes line up without forcing them. Forcing a tray into place can stress the mounting points and the frame.
When the bumper is on, check the tray bolts after the first few drives and again after hard off-road use. Look for loose nuts, cracking at the mounting holes and any movement between the tray and frame. Keep mud from building up on the tray so you can spot problems early, and keep the recovery points clear of the bumper face.
- Clean frame contact surfaces before mounting
- Replace bolts that show thread damage
- Recheck the tray after heavy recovery
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | BR10 (title) |
| UPC | 887753105011 |
| Product type | Front bumper winch tray |
| Series | BR10 |
| Mounting | Bolts directly onto the vehicle frame |
| Installation | Two-piece bumper installation |
| Required for | Front bumper installation |
| Fitment type | Direct fit |
Vehicle fitment
Confirm the year, model and trim against your vehicle before buying, and match the tray to the BR10 bumper application.
Do not assume the tray fits a vehicle that has not been confirmed by the manufacturer. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use fasteners of the correct grade. Because winch mounting is load-bearing, professional installation is recommended.
- Torque all fasteners to specification.
- Re-check the mounting bolts after the first miles of driving and after heavy use.
- Install the tray first, then the bumper, in that order.
What’s included
One BR10 front bumper winch tray.
Not included: The BR10 front bumper and any winch are not included. The tray is needed before the bumper can go on.








