Select your vehicle

Smittybilt SRC Front and Rear Bumper with Tire Carrier (Black) – TJSPECIAL03

Genuine Packages

Shop Genuine Packages Front Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Smittybilt SRC front and rear bumper set with tire carrier, part TJSPECIAL03
  • Rear receiver is 2 inches; carrier supports a tire up to 35 inches
  • 1/4-inch steel plate, zinc undercoating, black powder coat
  • Two light tabs and wide winch opening on the front bumper

Description

Overview

The Smittybilt SRC front and rear bumper with tire carrier, part number TJSPECIAL03, is a Genuine Packages combination of Smittybilt Rock Crawler Series bumpers and a swing-away tire carrier, finished in black powder coat. The rear section includes a 2-inch receiver, and the tire carrier is built to hold a tire up to 35 inches.

Smittybilt designs the Rock Crawler Series bumpers for off-road use. The bumpers use 2-inch tubes and 1/4-inch steel plate with a durable powder coat, and each has sloping ends for greater tire travel and easier entry and exit. The tire carrier is a knock-down design with a three point mounting system. Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • Durable powder coated 2-inch tubes and 1/4-inch steel plate
  • Dense zinc treated undercoating
  • Two tabs for mounting lights
  • Wide opening that allows winch installation
  • Heavy-duty 1/4-inch steel plate tire carrier
  • Three point mounting system supports a tire up to 35 inches
  • 2-inch receiver
  • Sloping ends for greater tire travel and better entry and exit

Before you buy

A full front and rear bumper set changes how the vehicle approaches obstacles, so the bumpers should match the way you drive. The front bumper carries the winch load during recovery, which means the winch, fairleads and mounting points all need to be suited to the pull you expect. A wide winch opening helps with installation, but the winch and its cable add weight that the front suspension has to carry.

A tire carrier adds weight at the rear, and a spare tire on a swing-away carrier shifts the balance of the vehicle. Check the rear hatch or tailgate clearance and the swing path before buying the carrier, and recheck the bolts after the first few trail runs. Light mounts, tabs and wiring should be planned together with the bumpers so the harness is routed before the bumpers are bolted on.

  • Check winch size against the bumper mounting points
  • Plan light wiring before final bolt-up
  • Re-check carrier and bumper fasteners after the first trail runs

Specifications

Brand Genuine Packages
Part number TJSPECIAL03
UPC 700007573871
Product Front and rear bumper set with tire carrier
Bumper line Smittybilt SRC (Rock Crawler Series)
Material Steel tube and 1/4 in steel plate
Finish Black powder coat over zinc treated undercoating
Maximum tire size 35 in
Receiver 2 in
Width Full
Light mounts Two tabs
Fit type Direct fit

Vehicle fitment

Confirm fit for your vehicle’s year, model and trim before ordering.

The part number begins with TJ, but that prefix is not a stated vehicle, so do not assume a Wrangler fit. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Models from 2012 onward with automatic transmissions may need a relocation bracket for the vacuum pump. Check this against your vehicle before installation.

What’s included

  • Smittybilt SRC front bumper
  • Smittybilt SRC rear bumper with 2-inch receiver
  • Tire carrier

Not included: a winch, lights or the tire.

SKU: ADDTJSPECIAL03 Category:

Specification

Shipping weight 253.00 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Questions & Answers

What does the TJSPECIAL03 package include?

TJSPECIAL03 combines Smittybilt SRC front and rear bumpers with a heavy-duty tire carrier. The rear bumper has a 2-inch receiver and the carrier supports a tire up to 35 inches.

What size tire does the TJSPECIAL03 tire carrier hold?

The carrier uses a three point mounting system and supports a tire up to 35 inches. It is made from 1/4-inch steel plate and uses a knock-down design.

Can a winch be installed on the TJSPECIAL03 front bumper?

Yes. The front bumper has a wide opening that allows winch installation. No winch is included, and the bumper also has two tabs for mounting lights.

Which vehicles is the TJSPECIAL03 package made to fit?

Confirm fit for your vehicle's year, model and trim before ordering. Compare the bumper and carrier mounting points with your frame and rear bumper area first, so the package matches your build.

How often should the bumper and carrier bolts be checked?

Check them after the first few trail runs and then at regular intervals. Off-road impacts and vibration can loosen bolts over time, so look for wear, cracked welds and bent mounting tabs whenever you check. Tighten the hardware to the torque your fasteners require and recheck after any impact.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Genuine Packages Front Bumpers on Amazon