Overview
The Smittybilt XRC front bull bar option, part number 76811, is a textured black tubular bull bar for the 1984-2001 Jeep Cherokee XJ. The bar is an add-on that requires Smittybilt’s XRC front bumper, part number S/B76810.
Smittybilt engineered the XRC bumper line for the 1984-2001 Jeep Cherokee to provide maximum ground clearance. The bumpers are made from 3/16-inch cold rolled steel that is robotically welded to exact specifications. The bull bar itself is built from 1.75-inch tubing and has two light tabs that hold lights up to 9 inches. Smittybilt says its design is capable of mounting a winch up to 15,000 lb.
Key features
- Requires front bumper part number S/B76810
- Textured black finish
- Built from 1.75-inch tubing
- Two light tabs that accept a light up to 9 inches
- Designed to mount a winch up to 15,000 lb
- 5-year limited warranty
Choosing a winch and lights
A front bar is the mounting point for the winch, so the winch weight and the pull force both load the bar and the bumper together. Match the winch to the rated capacity, make sure all fasteners are tightened, and align the winch fairlead with the bar face. A winch heavier than the bar was designed to carry adds stress that can crack welds over time.
Lights on the two light tabs add weight at the outer ends of the bar, so choose compact lights that keep the bar balanced. Route wiring away from moving parts and the winch cable path, and secure it with clamps. Check the tabs and bolts after the first rough trail run, since vibration loosens fasteners sooner than road use does.
- Check winch weight against the bar
- Use lights that match the tab size
- Re-tighten bolts after rough trail runs
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76811 |
| UPC | 631410092226 |
| Product | Front bull bar option |
| Series | XRC |
| Tubing | 1.75 in |
| Finish | Textured black |
| Light tabs | Two, for lights up to 9 in |
| Winch capacity | Up to 15,000 lb |
| Requires | Front bumper S/B76810 |
| Warranty | 5-year limited |
Vehicle fitment
The XRC bumper line is for the 1984-2001 Jeep Cherokee, the XJ generation. The bull bar only works with front bumper S/B76810.
The XRC line covers the 1984-2001 Jeep Cherokee. Verify your vehicle’s year, model and trim before ordering, including any Grand Cherokee or Liberty application.
What’s included
- XRC front bull bar
Not included: the S/B76810 front bumper that the bar bolts to, a winch and lights.






















