Overview
The Warn Elite Series front bumper, part number 87775, is a winch-mount front bumper in a black powder coated wrinkle finish, built from 3/16-inch steel plate. The bumper has a low, recessed winch mount, a wrap-around design and tapered ends that increase the approach angle.
The bumper suits overland trips and general off-roading. Recessed ports and mounts take auxiliary lights, welded eyelets accept D-shackles for recovery, and recessed jack points add recovery options. The mounting fasteners are hidden inside the bumper, which keeps the finish clean. It is made for 2 and 4-door models.
Key features
- Low, recessed winch mount that tucks the winch in for protection
- Wrap-around design in 3/16-inch steel plate
- Tapered ends for increased approach angles
- Welded eyelets for mounting D-shackles
- Recessed ports and mounts for auxiliary lights
- Recessed jack points for more stable jack positioning
- Mounting fasteners hidden inside the bumper
- Black powder coated wrinkle finish
- Minimal drilling and cutting required
Recovery and light planning
A recovery bumper concentrates load at its mounting points, so the eyelets and the recovery gear matter as much as the steel. Shackles should be rated for the pull you expect, and the eyelets should sit in line with the strap or line. Inspect shackle pins and eyelet welds after heavy use.
Auxiliary lights in recessed ports can throw light where you need it without sticking out far, but cable routing takes planning. Plan the wire path before cutting or drilling, keep wiring away from moving suspension parts, and protect connections from water and mud. Light lenses also need cleaning after trail runs to stay useful.
- Inspect eyelet welds after heavy pulls
- Check shackle pins for wear
- Clean light lenses after mud runs
Specifications
| Brand | Warn |
|---|---|
| Part number | 87775 |
| UPC | 12748877752 |
| Product | Front bumper with winch mount |
| Series | Elite Series |
| Material | Steel plate, 3/16 in |
| Finish | Black powder coat, wrinkle texture |
| Width | Full |
| Fit type | Direct fit |
| Body styles | 2 and 4-door models |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
| Grille guard | Not included |
Vehicle fitment
The bumper is made for 2 and 4-door models and fits as a direct-fit part. Verify the year, model and trim against your truck before buying.
Because no vehicle is named, do not assume this bumper fits any particular model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Minimal drilling and cutting are required, so plan on some fabrication work rather than a pure bolt-on swap. If you add auxiliary lights in the recessed ports, wire them through a fused relay.
What’s included
- Front bumper with integrated recessed winch mount
- Recessed light ports and mounts
- D-shackle eyelets welded to the bumper
- Hidden mounting fasteners
Not included: the grille guard, the winch, auxiliary lights and D-shackles.






















