Jeep Wrangler (JK) Axle Parts
109 axle parts listed for the 2007–2018 Jeep Wrangler (JK)
Showing 49–72 of 109 resultsSorted by popularity
-
Dana 44 Ring and Pinion, Ring and Pinions
G2 JK Rubicon Front and Rear 4.56 Ring and Pinion Kit – 4-JKRUB-456
Dana 44 Ring and Pinion, Ring and PinionsG2 JK Rubicon Front and Rear 4.56 Ring and Pinion Kit – 4-JKRUB-456
- Front and rear 4.56 ring and pinion kit for Rubicon JK Wranglers
- Dana 44 front axle and Dana 44 rear axle
- Includes matched front and rear master installation kits
- Computer heat treated 8620 steel
- Limited lifetime warranty
SKU: G/24-JKRUB-456 -
Dana 44 Ring and Pinion, Ring and Pinions
G2 Dana 44 JK Front Reverse 4.56 Ratio Ring and Pinion – 2-2051-456R
Dana 44 Ring and Pinion, Ring and PinionsG2 Dana 44 JK Front Reverse 4.56 Ratio Ring and Pinion – 2-2051-456R
- G2 Dana 44 JK front reverse 4.56 ratio ring and pinion, part number 2-2051-456R
- For use with a 3.73 and down carrier, per G2
- Fits the Jeep Wrangler JK front axle, based on the JK name in the title
SKU: G/22-2051-456R -
Dana 44 Ring and Pinion, Ring and Pinions
G2 Dana 44 JK Front Reverse 5.13 Ratio Ring and Pinion – 2-2051-513R
Dana 44 Ring and Pinion, Ring and PinionsG2 Dana 44 JK Front Reverse 5.13 Ratio Ring and Pinion – 2-2051-513R
- G2 Dana 44 JK front reverse 5.13 ratio ring and pinion, part number 2-2051-513R
- For use with a 3.73 and down carrier, per G2
- Fits the Jeep Wrangler JK front axle, based on the JK name in the title
SKU: G/22-2051-513R -
Dana 44 Ring and Pinion, Ring and Pinions
G2 Dana 44 JK Rear 5.38 Ratio Ring and Pinion – 2-2052-538
Dana 44 Ring and Pinion, Ring and PinionsG2 Dana 44 JK Rear 5.38 Ratio Ring and Pinion – 2-2052-538
- G2 Dana 44 JK rear ring and pinion with a 5.38 ratio, part number 2-2052-538
- Based on the product name, for the rear Dana 44 axle in the 2007–2018 Jeep Wrangler (JK)
- Made for a 3.73 and down carrier
- 10-year warranty
SKU: G/22-2052-538 -
Ring and Pinions
G2 Dana 30 JK Front Reverse 5.13 Ratio Ring and Pinion – 2-2050-513R
- G2 Axle and Gear 5.13 ratio front reverse ring and pinion for the Dana 30 JK front axle, part 2-2050-513R
- For use with 3.73 and up carriers
- Computer heat treated 8620 steel, double shot peened, double lapped
- 10 year warranty from G2
SKU: G/22-2050-513R -
Dana 44 Ring and Pinion, Ring and Pinions
G2 Dana 44 JK Front Reverse 4.88 Ratio Ring and Pinion – 2-2051-488R
Dana 44 Ring and Pinion, Ring and PinionsG2 Dana 44 JK Front Reverse 4.88 Ratio Ring and Pinion – 2-2051-488R
- G2 Dana 44 JK front reverse 4.88 ratio ring and pinion, part number 2-2051-488R
- For use with a 3.73 and down carrier, per G2
- Fits the Jeep Wrangler JK front axle, based on the JK name in the title
SKU: G/22-2051-488R -
Dana 44 Bearings and Install Kits, Ring and Pinion Installation Kits
G2 Dana 44 JK Rubicon Front Master Ring and Pinion Installation Kit – 35-2051
Dana 44 Bearings and Install Kits, Ring and Pinion Installation KitsG2 Dana 44 JK Rubicon Front Master Ring and Pinion Installation Kit – 35-2051
- Front master ring and pinion kit for the Dana 44 on Jeep JK Rubicon, part number 35-2051
- Includes Timken pinion bearings and carrier bearings with races
- Rubicon front axle only
- Fits Wrangler JK models from 2007 through 2018
SKU: G/235-2051 -
Ring and Pinion Installation Kits
G2 Dana 30 JK With ARB Air Locker Master Ring and Pinion Installation Kit – 35-2050ARB
Ring and Pinion Installation KitsG2 Dana 30 JK With ARB Air Locker Master Ring and Pinion Installation Kit – 35-2050ARB
- Master kit with bearings for the Dana 30 (Jeep JK front, ARB Air Locker) axle, front
- For use in Jeep JK Dana 30 front with ARB Air Locker only
- Includes Timken pinion bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2050ARB -
Dana 44 Bearings and Install Kits, Ring and Pinion Installation Kits
G2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
Dana 44 Bearings and Install Kits, Ring and Pinion Installation KitsG2 Dana 44 JK Rubicon Rear Master Ring and Pinion Installation Kit – 35-2052
- Master ring and pinion installation kit for the rear Dana 44 on Jeep JK Rubicon, part number 35-2052
- Includes Timken pinion bearings and carrier bearings with races
- Made for JK Rubicon rears with a factory locker
- Covers Wrangler JK, 2007–2018
SKU: G/235-2052 -
Dana 44 Bearings and Install Kits, Ring and Pinion Installation Kits
G2 Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 35-2053
Dana 44 Bearings and Install Kits, Ring and Pinion Installation KitsG2 Dana 44 JK Non Rubicon Rear Master Ring and Pinion Installation Kit – 35-2053
- Master ring and pinion installation kit for the rear Dana 44 on non-Rubicon Jeep Wrangler JK, part number 35-2053
- Includes Timken pinion bearings and races, and carrier bearings and races
- Pinion nut, pinion seal, crush sleeve, shims and ring gear bolts included
- Wrangler JK, 2007-2018, non-Rubicon rear Dana 44
SKU: G/235-2053 -
Ring and Pinion Installation Kits
G2 Dana 30 JK Master Ring and Pinion Installation Kit – 35-2050
- Master kit with bearings for the Dana 30 (Jeep JK front) axle, front
- For use in Jeep JK Dana 30 front only
- Includes Timken pinion bearings and carrier bearings, shims, nut, seal and crush sleeve
- Gear marking compound, thread locking compound and silicone sealer
SKU: G/235-2050 -
Ring and Pinions
G2 Dana 30 JK Front Reverse 4.56 Ratio Ring and Pinion – 2-2050-456R
- G2 Axle and Gear 2-2050-456R front reverse Dana 30 ring and pinion, 4.56 ratio
- For the front Dana 30 axle of 2007–2018 Jeep Wrangler JK
- Computer heat treated 8620 steel, double shot peened and double lapped
- For use with a 3.73 and up carrier
SKU: G/22-2050-456R -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Chromoly Inner Axle Shaft – 97-2051-002
- Front driver side inner axle shaft for the Dana 44 JK
- 30 spline chromoly shaft with stock overall length
- Accepts a 5-7166X U-joint; machined for full circle clips
- Fits Wrangler JK from 2007 up
SKU: G/297-2051-002 -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 44 JK Rubicon Replacement Driver Rear Axle Shaft – 95-2052-2-321
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 44 JK Rubicon Replacement Driver Rear Axle Shaft – 95-2052-2-321
- Driver side rear axle shaft for 2007–2018 Jeep Wrangler JK Rubicon
- 32 splines, overall length 31.18 inches
- Pilot 2.828 inch, 5 on 5 inch bolt circle
- Wheel studs not included
- Forged alloy steel, heat treated to exceed OEM specifications
SKU: G/295-2052-2-321 -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 4.56 Ring and Pinion Minor Installation Kit – 4-JKRUB-456M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 4.56 Ring and Pinion Minor Installation Kit – 4-JKRUB-456M
- 4.56 front and rear Dana 44 ring and pinion kit
- For Rubicon Wrangler JK, 2 and 4 door, per G2
- Includes front and rear matched minor installation kits
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-JKRUB-456M -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 4.88 Ring and Pinion Minor Installation Kit – 4-JKRUB-488M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 4.88 Ring and Pinion Minor Installation Kit – 4-JKRUB-488M
- 4.88 front and rear Dana 44 ring and pinion kit
- For Rubicon Wrangler JK, 2 and 4 door, per G2
- Includes front and rear matched minor installation kits
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-JKRUB-488M -
Ring and Pinion Installation Kits
G2 Dana 44/44 JK 5.13 Ring and Pinion Minor Installation Kit – 4-JKRUB-513M
Ring and Pinion Installation KitsG2 Dana 44/44 JK 5.13 Ring and Pinion Minor Installation Kit – 4-JKRUB-513M
- 5.13 front and rear Dana 44 ring and pinion kit
- For Rubicon Wrangler JK, 2 and 4 door, per G2
- Includes front and rear matched minor installation kits
- Computer heat treated 8620 steel; limited lifetime warranty
SKU: G/24-JKRUB-513M -
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Placer Gold Series Dana 44 JK Rear Axle Shaft – 195-2052-1
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Placer Gold Series Dana 44 JK Rear Axle Shaft – 195-2052-1
- G2 Placer Gold Dana 44 JK rear axle shaft, part 195-2052-1
- Driver or passenger side, 30 spline for aftermarket lockers
- Forged 4340 chromoly with a dual bolt pattern flange
- Fits 2007 to 2018 Wrangler JK, 2 and 4-door
SKU: G/2195-2052-1 -
-
Dana 44 Axle Shafts, Replacement Axle Shafts
G2 Dana 30/44 JK Placer Gold Front Outer Axle Shaft – 197-2051-001
Dana 44 Axle Shafts, Replacement Axle ShaftsG2 Dana 30/44 JK Placer Gold Front Outer Axle Shaft – 197-2051-001
- G2 Axle and Gear Placer Gold front outer axle shaft, part number 197-2051-001
- Made for Jeep JK Dana 30 and Dana 44 front stub axles, 2007-2018 Wrangler JK
- Forged from 4340 chromoly steel, 6.25 in long, 32 spline hubs
SKU: G/2197-2051-001 -
Dana 44 U-Joints, Front Axle U-Joints
Dana Spicer JK Wrangler Rubicon Axle U-Joint – 5-7166X
- Dana Spicer Dana 44 axle U-joint, part number 5-7166X
- Fitment inferred from the title for the JK Wrangler Rubicon (2007-2018)
- Forged cross with improved seals and a perma-lube design
- Inside snap ring, snap ring to snap ring 2.405in.
- OEM replacement with no lube channel
SKU: D/S5-7166X -
Dana 44 Ring and Pinion, Ring and Pinions
G2 JK Front and Rear 4.56 Ring and Pinion Kit – 4-JK-456
- Front and rear 4.56 ring and pinion kit for JK Wranglers
- Dana 30 front axle and Dana 44 rear axle
- Includes matched front and rear master installation kits
- Computer heat treated 8620 steel, double shot peened and double lapped
- Limited lifetime warranty
SKU: G/24-JK-456
