Overview
The Alloy USA 11106 is a pair of black anodized billet aluminum outer axle tube seals for Dana 30 and Dana 44 axles on 2007 and newer Jeep Wrangler JK models. Each seal helps keep water, mud and debris out of the front axle housing.
The seals are CNC machined and use double sealing for added protection from the elements. They do not work with a passenger side vacuum disconnect two-piece axle shaft.
Key features
- CNC machined billet aluminum construction
- Black anodized finish
- Double sealing for added protection
- Supplied as a pair
- Not for passenger side vacuum disconnect two-piece axle shafts
Keeping water out of the axle
Outer axle tube seals sit where the axle tube meets the knuckle or hub area, and their job is to keep water, mud and grit from working into the housing. Anodized aluminum seals hold up well to exposure, but the seal fit and the gasket underneath matter more than the finish. A seal that sits crooked or has worn lips can let moisture in during deep water crossings, and that moisture can carry grit toward the bearings.
When fitting a pair, clean the mating surfaces and confirm both seals go on in the same position. Check the front axle shaft type first, since passenger side vacuum disconnect two-piece shafts are not compatible with these seals. After a trail run, look for water, mud or grease where the seal meets the tube, and recheck the seal if you notice any change in the bearing grease.
- Check the axle shaft type before fitting
- Clean both mating surfaces before installing
- Inspect the seal lip for wear after deep water
- Look for grit or water in the bearing grease
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 11106 |
| UPC | 804314220969 |
| Material | Billet aluminum |
| Finish | Black anodized |
| Color | Black |
| Axle location | Front |
| Position | Rear |
| Axle types | Dana 30 JK, Dana 44 JK |
| Quantity | Pair |
Vehicle fitment
These seals fit 2007 and newer Jeep Wrangler JK models with Dana 30 JK and Dana 44 JK front axles, based on the model years and the JK chassis.
The short text also mentions 1997 and newer Jeep Dana 30 and Dana 44 front axles, which goes beyond the JK models covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The position field reads Rear while the axle location reads Front, so confirm the correct position before fitting. Check your axle shaft type too, since passenger side vacuum disconnect two-piece shafts are not compatible.
What’s included
A pair of black anodized billet aluminum outer axle tube seals.














