Overview
The TeraFlex HD Skid Plate for Rear Falcon Shocks, part number TER36-07-01-300 (36-07-01-300), is a heavy-duty 1/4″ cold rolled steel shock skid for the rear Falcon piggyback shocks on the 2007–2018 Jeep Wrangler (JK) and JKU.
The heavy-duty skid plates are made from 1/4 inch cold rolled steel and are sold for the rear Falcon piggyback shocks. The Falcon shocks use hard anodized 6061-T6 aluminum. The plates are left raw, so they can be welded on for more strength or painted to match the vehicle, though welding is not required. The Eco-Guard mounting hardware has passed a 1,000-hour salt spray corrosion test.
Key features
- Heavy-duty rear shock skid plates for the Wrangler JK and JKU
- Constructed from 1/4″ cold rolled steel
- Designed for the TeraFlex Falcon piggyback shocks
- Can be welded on for more strength, but welding is not required
- Eco-Guard mounting hardware survived the 1,000-hour salt spray corrosion test
- Bolt-on installation with no cutting or drilling required
Skid protection on the trail
A rear shock skid guards the lower shock body and mount from rocks, stumps and ledges. Piggyback shocks have a reservoir hose and a larger body, which makes them more exposed than a standard shock. A steel plate spreads an impact across the mount instead of letting it land on a single point, and it keeps the shock from being pushed out of position during rough articulation.
Check the plate after each trail run. Look for bent edges, cracked welds if the plate is welded, and loose bolts. Recheck the hardware after the first few trips, since trail vibration can back bolts out. When a plate is painted or coated, keep the mounting faces clear so the plate seats flat against the body and does not hold moisture against the steel.
- Inspect the shock reservoir hose for rubbing
- Check the plate for bends after rock crawling
- Keep mounting faces clean and dry
- Replace hardware that shows corrosion
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER36-07-01-300 |
| Product type | Rear shock skid plates |
| Material | Cold rolled steel, 1/4″ thick |
| Finish as listed | Raw steel, unfinished |
| Hardware | Eco-Guard mounting hardware |
| Designed for | TeraFlex Falcon rear shocks |
| Fitment type | Direct fit |
| Installation type | No cutting or drilling required |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including the JKU four-door version.
Confirm your year, model and trim match the JK before ordering, since this part is designed for the JK and JKU.
Installation notes
The plates bolt on and TeraFlex says no cutting or drilling is required. TeraFlex says welding them on is optional for extra strength.
What’s included
The kit includes the heavy-duty rear shock skid plates with Eco-Guard mounting hardware.
Not included: Falcon shocks.
