Overview
The TeraFlex BellyUp Transfer Case Skid Plate, part number 4648403, replaces the factory skid plate with a lower profile support that raises ground clearance by up to two inches. It is made from heavier materials than the stock skid and is designed to protect the undercarriage.
It fits 2004 to 2006 Wrangler LJ models, including the Unlimited and Unlimited Rubicon versions, and 1997 to 2006 Wrangler TJ models. A one-inch body lift is recommended, and some exhaust adjustments may be needed.
Key features
- Replaces the factory skid plate
- Lower profile support for more ground clearance
- Up to two inches of added ground clearance.
- Stronger and heavier materials than the stock skid
- Black powder coat finish
- No cutting or drilling required
Driveline and clearance checks
A transfer case skid sits under the transfer case and the front driveline area, so it is one of the first parts to meet obstacles on steep or uneven ground. Raising the protected area gains clearance, but it also changes the angles the driveline works through. Those angles are the main reason to pay attention to vibration and exhaust fit after installation, because small shifts in height can alter how the drive shaft and pipes sit.
Body lift height and tire size both affect how much of the added height a vehicle actually uses. Vehicles at stock height may see less benefit, while lifted vehicles may need closer checks on the drive shaft and exhaust. After the first drive, listen for new vibration at speed, look for rub marks on the drive shaft and pipes, and recheck the skid hardware after rough trails.
- Plan exhaust adjustments before fitting
- Check drive shaft angles after any lift change
- Look for rub marks on pipes and drive shaft
- Recheck hardware after rough trails
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4648403 |
| UPC | 843885005179 |
| Position | Transfer case |
| Ground clearance gain | Up to two inches of ground clearance. |
| Finish | Black powder coat |
| Recommended lift | One-inch body lift |
| Possible additional part | Slip-yoke eliminator kit if drive shaft vibration appears |
| Installation | No cutting or drilling required |
Vehicle fitment
It fits the 2004-2006 Jeep Wrangler (LJ) and the 1997-2006 Jeep Wrangler (TJ).
A stock-height vehicle may not see the full clearance gain, since a one-inch body lift is recommended. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
TeraFlex recommends a one-inch body lift with this skid, and some exhaust adjustments may be necessary. If drive shaft vibration is noticed, a slip-yoke eliminator kit may be required. A slip-yoke eliminator replaces the transfer case output connection and is a separate kit.
What’s included
The transfer case skid plate.












