Overview
The TeraFlex Control Arm Skid Plate, part number 4937330, is a front lower control arm skid for the Jeep JK Wrangler. It is designed to protect and strengthen the lower control arm assembly from bending and damage on the trail.
The brackets are CNC laser cut from 1/4-inch steel, finished in black powder coat, and designed to be welded on for strength and durability. The pair is sold together. Check the mounting method against your vehicle before ordering.
Key features
- Protects the front lower control arm assembly from bending
- Helps strengthen the lower control arm
- 1/4-inch CNC laser cut brackets
- Designed to be welded on
- Black powder coat finish
- Supplied in pairs
Before you weld
Control arm skids sit beneath the front lower control arm and take hits from rocks and stumps that would otherwise bend the arm. When a skid is welded on, the bracket becomes part of the arm’s structure, so weld quality matters as much as the plate itself. Clean the mounting surfaces to bare metal, check that the bracket sits square against the arm, and tack it in place before running full beads.
Off the trail, a skid adds a little weight at the front of the axle area and can change how close the arm sits to the ground. Inspect the skids after each hard outing for cracked welds, paint chips that let rust start, and any bend in the arm itself. Replacing worn control arm bushings at the same time is common practice, since a sagging arm shifts the load onto the skid.
- Clean mounting surfaces to bare metal before welding
- Check bracket alignment against the arm before final welds
- Inspect welds after each hard trail outing
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 4937330 |
| UPC | 843885028413 |
| Material | 1/4-inch steel, CNC laser cut |
| Finish | Black powder coat |
| Type | Control arm skid |
| Quantity | Pair |
| Mounting | Designed to be welded on |
Vehicle fitment
It fits the front lower control arm of the Jeep Wrangler (JK) from 2007 to 2018.
The skid is written for the JK front lower control arm, so the JK is the vehicle it covers. Check your front lower control arm against the bracket before welding. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets are designed to be welded on, so this is a welding job. Confirm which mounting method applies to your vehicle before starting, since some setups need no cutting or drilling.
What’s included
A pair of front lower control arm skid brackets. Hardware and welding materials are not included, so have those ready before installing.








