Overview
The Skid Row Off Road Fuel Tank Skid Plate (Black), part number JP-0010, is a 3/16-inch steel skid plate for a low-hanging Wrangler gas tank. It bolts right over the original factory skid plate that covers a 15- or 20-gallon tank, adding protection to the bottom and sides of the tank.
The plate is steel on the bottom and sides and comes powder-coated in a semi-gloss black. Some drilling is required during installation, so this is not a no-drill bolt-on part. It is made in the USA.
Key features
- 3/16-inch steel on the bottom and sides of the tank
- Semi-gloss black powder coat
- Bolts over the original factory skid plate
- Covers 15- or 20-gallon gas tanks
- Made in the USA
Choosing a tank skid plate
A skid plate that bolts over a factory plate adds a second layer of protection. The original plate still carries the first hit, and the new steel spreads the load across the bottom and sides of the tank. This setup suits owners who want more coverage without removing the factory part, but it also raises the tank slightly and adds weight, so check the clearance to the fuel lines and straps.
Before you install, clean the surfaces where the plate will sit and check the factory plate for cracks or rust. Mark drill locations carefully and use a bit sized for the hardware. Use hardware rated for underbody use and add thread locker where the design calls for it. Recheck every fastener after the first few trips over rough ground.
- Measure fuel line and strap clearance before drilling
- Clean the mounting surfaces and check for rust
- Recheck bolts after the first trail runs
Specifications
| Brand | Skid Row Off Road |
|---|---|
| Part number | JP-0010 |
| UPC | 609224069772 |
| Product type | Fuel tank skid plate |
| Material | 3/16-inch thick steel |
| Finish | Semi-gloss black powder coat |
| Coverage | Bottom and sides of the tank |
| Installation | Bolts over the original skid plate; some drilling required |
| Origin | Made in the USA |
Vehicle fitment
It fits a Wrangler with a low-hanging gas tank that uses the factory 15- or 20-gallon skid plate. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required, and the plate mounts over the original 15- or 20-gallon tank skid plate rather than replacing it. Plan the drilling and hardware before starting the install.
What’s included
The black powder-coated steel skid plate.
Not included: the factory skid plate, which this plate bolts over.
















