Overview
The Skid Row Off Road Gas Tank Skid Plate (Black), part number SFKJP-3001 (JP-3001), is a bolt-on fuel tank skid for the 1993–1998 Jeep Grand Cherokee (ZJ) and the 1997–2001 Jeep Cherokee (XJ).
Skid Row Off Road says its gas tank skid is much stronger than the factory part and protects one of the most critical parts of the vehicle. The skid is made from 3/16″ thick steel on the bottom and sides, is powder coated, and bolts on, with a design that works with virtually any hitch. The manufacturer adds that most ZJs already have the necessary bolts installed, while XJ owners without a hitch must provide the nut plates that fit inside the chassis. The XJ and ZJ share this skid because both Jeeps carry their fuel tank in a similar position under the rear of the vehicle.
Key features
- Gas tank skid plate for the ZJ Grand Cherokee and XJ Cherokee
- 3/16″ thick steel on the bottom and sides
- Completely bolt-on
- Black powder coat finish
- Designed to work with virtually any hitch
- Most ZJs already have the necessary bolts installed
- No cutting or drilling required
Fuel tank protection
The fuel tank sits low under the rear of the vehicle, where it can be struck by rocks, stumps and trailer hitches. A tank skid spreads the force of an impact across a wider area, which helps protect the tank and fuel lines. A skid can also keep debris from wearing into the bottom of the tank over time, which is useful on rocky trails.
Before fitting, clean the mounting area and check the tank straps, hangers and fuel lines for wear. Look for leaks at the tank or lines after any hard impact. Recheck the bolts after the first few trail runs, and inspect the powder coat for chips that could start rust on the steel. Keep the area around the tank clear of mud, since packed debris holds moisture against the metal.
- Check tank straps and hangers for wear
- Inspect fuel lines after a hard impact
- Re-tighten bolts after the first trail runs
Specifications
| Brand | Skid Row Off Road |
|---|---|
| Part number | SFKJP-3001 |
| Product type | Gas tank (fuel tank) skid plate |
| Material | Steel, 3/16″ thick on the bottom and sides |
| Finish | Black powder coat |
| Fitment type | Direct fit |
| Installation type | No cutting or drilling required |
| Hitch compatibility | Designed to work with virtually any hitch |
Vehicle fitment
Skid Row Off Road lists part number SFKJP-3001 for two Jeeps: the 1993–1998 Grand Cherokee (ZJ) and the 1997–2001 Cherokee (XJ).
This skid is for the ZJ Grand Cherokee and XJ Cherokee. Make sure your year, model and trim match before ordering.
Installation notes
The skid is bolt-on and needs no cutting or drilling. Most ZJs already have the needed bolts installed, but if an XJ has no hitch, the owner must provide the nut plates that fit inside the chassis.
What’s included
For an XJ without a hitch, nut plates are not supplied.
Not included: nut plates for an XJ without a hitch.













