Overview
The Skid Row Off Road Engine Skid Plate, part number JP-4001, protects the transmission and the engine oil pan on the 2002 to 2007 Jeep Liberty KJ. It is designed to work with Liberty CRD models.
The skid is made from 3/16-inch thick steel with a black powder coat finish, and it is made in the USA. It mounts in several locations. It protects without reducing ground clearance or adding excessive weight, and its smooth underside slides over obstacles more easily.
Key features
- Protects the transmission and the engine oil pan
- 3/16-inch thick steel
- Smooth underside for sliding over obstacles
- Attaches in several locations
- Works with CRD models
- Oil filter changes can be done with the skid installed
- Black powder coat finish
Before you install an engine skid
Engine and transmission skids sit under the oil pan and transmission case, where rock strikes and stumps are most likely to make contact. Their main job is to absorb a hit that would otherwise bend the pan or crack the transmission housing. Because the plate sits low, its underside shape matters on rocky trails. A smooth face lets the vehicle slide over ledges instead of catching on them.
Check the skid and its mounting hardware after rough trail days. Look for cracked welds on the mounting tabs, bent edges, and chipped powder coat that exposes bare metal to moisture. Touch-up paint on bare spots slows rust. When planning service, keep the drain plug and oil filter in mind so the skid does not make routine maintenance harder.
Specifications
| Brand | Skid Row Off Road |
|---|---|
| Part number | JP-4001 |
| UPC | 609224070123 |
| Position | Engine oil pan and transmission |
| Material | 3/16-inch plate steel |
| Finish | Black powder coat |
| Origin | Made in the USA |
| Installation | No drilling if the factory transfer case skid is present |
Vehicle fitment
It fits the 2002-2007 Jeep Liberty (KJ), including the 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport versions. Confirm your vehicle’s year, model and trim before ordering.
It is designed around CRD models, which are not separated from the other KJ versions. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check whether your Jeep has the factory transfer case skid before choosing the install method. With the factory plate, no drilling is needed. Without it, drill two holes through the transmission cross member for two carriage bolts.
What’s included
The engine and transmission skid plate with its mounting parts, as the short notes describe.






















