Overview
The Skid Row Off Road Front Skid Plate, part number JP-5000, replaces the plastic front protector on the Jeep JK. The factory plastic protector is not built for off-road use, and this skid is made to handle the trail. The finish is silver powder coat.
The plate is made from 1/8-inch thick steel with a durable silver powder coat finish. All hardware is included, and installation needs no drilling or cutting. It is for the 2007 to 2018 Wrangler JK.
Key features
- Replaces the factory plastic front protector
- 1/8-inch thick steel
- Silver powder coat finish
- All hardware included
- No drilling or cutting required
- Made in the USA
Protecting the front end
A front skid plate sits low under the bumper and takes the first hit when the vehicle climbs over rocks, ledges or stumps. Its job is to keep debris away from the lower front of the engine and radiator area, and to spread an impact across a wider surface than a plastic protector can. On rocky trails, a plate like this lets a driver pick a line with less worry about the front of the vehicle getting dinged or pushed out of position.
Front plates work best when the rest of the front end is considered too. A heavier bumper, a winch mount or a lift kit can change where the plate sits and how much room it has. Before installing, look at the bumper, tow hooks and any aftermarket steering or suspension parts so nothing rubs. After the first few trail outings, recheck the hardware and look over the powder coat where rock contact is heaviest, since bare steel can start to rust underneath.
- Check clearance around tow hooks before installing
- Recheck hardware after the first few trail runs
- Touch up chipped finish to slow surface rust
- Look over the bumper and winch mounts for fit
Specifications
| Brand | Skid Row Off Road |
|---|---|
| Part number | JP-5000 |
| UPC | 609224070150 |
| Position | Front |
| Material | 1/8-inch steel |
| Finish | Silver powder coat |
| Hardware | All hardware included |
| Installation | No drilling or cutting required |
Vehicle fitment
It is for the 2007-2018 Jeep Wrangler (JK).
The Rubicon models with the remote sway bar disconnect can use this plate, but it is not designed to protect the disconnect motor. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The plate needs no drilling or cutting, and all the hardware is included. It does not protect the sway bar disconnect motor on Rubicon models, so check the clearance around that motor before installing.
What’s included
The front skid plate with all hardware.




















