Overview
The Skid Row Off Road JP-5007 is an evaporative canister guard in black powder coat that protects the canister, which sits in a vulnerable spot under Jeep Wranglers. It is made of 3/16-inch steel for 2- and 4-door models.
The front and rear edges are folded at 45 degrees so the guard slides over obstacles rather than catching on them, and the sides are folded up 1 inch for added strength. The front mounting bracket is 1/4-inch thick steel, which Skid Row Off Road says resists rock strikes better than the lighter brackets of competing guards.
The front and rear edges are folded at 45 degrees so the guard slides over obstacles, and the folded edges help against rock strikes. The guard can be installed in less than an hour with simple hand tools. The 1/4-inch front bracket adds strength.
Key features
- 3/16-inch steel plate
- 1/4-inch thick front mounting bracket
- Front and rear edges folded at 45 degrees
- Sides folded up 1 inch
- Black powder coat finish
- No drilling required
- All hardware included
- Made in the USA
Canister guard basics
The evaporative canister is part of the emissions system and is usually mounted low and near the frame rail, which makes it exposed to rocks and stumps on the trail. A guard keeps that exposure off the canister, but it does not change how the system works. Keep the canister hoses and clamps in good shape, since cracked lines are a common cause of emissions warnings that have nothing to do with the guard.
When fitting a canister guard, check the clearance to the fuel lines and wiring nearby, and make sure nothing rubs once the vehicle is at full ride height. Inspect the guard after rough trips for bent folds, loose fasteners and paint scrapes that can start corrosion. Replace bent brackets rather than forcing them back into shape, because a misaligned mount can put strain on the canister lines.
Specifications
| Brand | Skid Row Off Road |
|---|---|
| Part number | JP-5007 |
| UPC | 609224070181 |
| Type | Evap canister guard |
| Plate material | 3/16-inch steel |
| Bracket material | 1/4-inch thick steel |
| Finish | Black powder coat |
| Installation | No cutting or drilling required |
| Side folds | Sides folded up 1 inch |
| Hardware | All included |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2- and 4-door Jeep Wrangler models, but not 2012–2016 JK models.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The guard installs in less than an hour with simple hand tools, without drilling or changes to the emissions system. Confirm fit for your model year before starting, and check that the guard clears the canister once it is in place.
What’s included
The hardware comes in the box, so lay everything out before starting.
















