Overview
The Rigid Industries SR-M Series LED Back Up Light is a flush-mount kit of two diffused single-row mini lights. The housings are 6063 aluminum, and the kit comes with an extended wire harness and the necessary hardware for a flush install.
The lights are OE quality, with a GORE pressure equalizing vent and a durable polycarbonate lens. They are IP68 certified and produce zero UV emissions. The kit has a 50,000-hour lifespan and no warm-up, with an instant on and off.
Key features
- Flush-mount installation
- Diffused single-row mini design
- 6063 aluminum housing
- Extended wire harness
- GORE pressure equalizing vent
- IP68 certified and RoHS compliant
Flush mount planning
Flush-mounted lights depend on a careful opening. The hole needs to match the housing closely enough that the trim sits flat, and the light should be dry-fitted before any sealant goes on. Test the light by temporarily connecting the harness, so any wiring issue shows up before the panel is set in place.
Rear-panel lights also see more weather and debris than many interior wiring jobs. Use a sealant suited to the panel material, and keep the harness routed above the lowest point of the vehicle so water cannot follow it into the housing. Look over the seal each season, since a small gap is easier to fix than a damaged circuit.
- Dry-fit the housing before applying sealant
- Use a grommet where the harness passes through metal
- Check the lens for fogging after wet weather
- Leave a service loop behind the housing
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774016967 |
| Series | SR-M Series |
| Sold as | Kit with 2 LED lights |
| Light type | LED back up light, single row mini |
| Mounting | Flush |
| Beam pattern | Diffused |
| Housing | 6063 aluminum |
| Lens | Durable polycarbonate |
| Ingress rating | IP68 certified |
| Rated life | 50,000 hours |
Vehicle fitment
It is a universal fit and is not built for one vehicle. Because it is a flush install, the rear panel needs a clean opening for the mini housing, so confirm the fit for your vehicle’s year, model and trim before cutting.
Installation notes
Run the extended harness from each light to the reverse circuit, using the hardware supplied. Keep the wiring away from moving parts, and check local rules on back up lights before wiring them to a road-going vehicle.
What’s included
The kit holds two diffused single-row mini lights, an extended wire harness and the necessary hardware.









