Overview
The Rigid Industries A-Series LED Light is a set of two cool white LED lights built for use anywhere on a vehicle. The set puts out 400 lumens with a total draw of 4 watts, and it offers exterior or external wiring options for installation.
The housing is a waterproof cast aluminum body with a polycarbonate lens that has a UV anti-scratch coating. Rigid protects the lights with a polyester powder coat and an alodine undercoating for long life. The lights are reverse voltage protected and rated for a 10 to 28 volt input.
Key features
- Cool white LEDs
- 400 lumens total output
- Waterproof cast aluminum housing
- Polycarbonate lens with UV anti-scratch coating
- Reverse voltage protection
- Exterior or external wiring options
Choosing exterior or external wiring
Exterior and external wiring options give the installer a choice between a cleaner look and an easier route to the power source. A run that follows existing harness paths is less likely to rub or get snagged on trail obstacles, while a run down the outside of the vehicle is simpler to access for repairs. Pick the route before cutting any panel.
Whichever route you choose, fuse the circuit within the 10 to 28 volt range the light is rated for and use a switch the driver can reach. Seal connections with dielectric grease or heat-shrink to keep moisture out. After installation, check that the lights hold firmly and that the lens is clean and undamaged before each trip.
- Plan the route before cutting panels
- Seal every connection
- Check the mounts after rough trips
Specifications
| Brand | Rigid Industries |
|---|---|
| UPC | 849774018770 |
| Series | A-Series |
| Light type | LED light, sold as a set of two |
| Light color | Cool white |
| Lumens | 400 |
| Total draw | 4 watts |
| Input voltage | 10 to 28 volts |
| Housing | Waterproof cast aluminum |
| Lens | Polycarbonate with UV anti-scratch coating |
| Finish | Black, polyester powder coat with alodine undercoating |
Vehicle fitment
The A-Series light is not made for one vehicle, which leaves the mounting point to the owner. It can be used anywhere on the vehicle.
Installation notes
Choose exterior or external wiring for the install, then route the cable away from heat and moving parts. Fuse the circuit within the 10 to 28 volt range the light is rated for, and check local rules on auxiliary lighting before using it on a road vehicle.
What’s included
The set includes two cool white A-Series lights. Plan the wiring and mounting hardware for the chosen spot before starting.









