Overview
The Pro Comp rear alignment cam bolts, part number 20-65228, are a rear pinion angle kit for lifted 2007 Jeep Wrangler JK models. They replace the fixed lower control arm mounting bolts that attach the lower arms to the axle, so the rear pinion angle can be adjusted.
Lifted 2007 Jeep JK models can develop driveline vibration when the pinion angle is off. A rear alignment cam bolt kit adjusts the rear pinion angle to help reduce that vibration. The kit fits 2-door and 4-door models. A front cam bolt kit is used to fine tune caster on lifted JKs, but this part is the rear version. The UPC for this part is 614901116441.
Key features
- Rear cam bolt that replaces the fixed lower control arm bolts
- Adjusts rear pinion angle
- Helps diminish driveline vibration
- Fits 2-door and 4-door models
Pinion Angle and Lift Height
Pinion angle changes when a suspension is lifted, and the lower control arms and axle can move as a result. Cam bolts give a way to set the rear pinion angle, but they work best when the rest of the suspension is in good shape. Worn bushings, bent arms or loose mounts can make the adjustment hard to hold.
A lift of this range usually brings other alignment questions, including caster and steering geometry. Once the cam bolts are set, an alignment check helps confirm the front and rear are working together. Keep the adjustment marks so the setting can be returned to if needed.
- Inspect control arm bushings before adjusting
- Check U-joints for play after the change
- Have the alignment rechecked after the lift is complete
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 20-65228 |
| UPC | 614901116441 |
| Type | Rear alignment cam bolt |
| Body style | 2-door and 4-door |
Vehicle fitment
This kit fits lifted 2007 Jeep Wrangler JK models, the Wrangler (JK) for the 2007 model year. It is intended for trucks with a 2 to 5 inch JK suspension lift. Confirm your lift height and model year before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cam bolts replace the stock lower control arm bolts, so the axle must be supported while the bolts are changed. Once installed, check the pinion angle and set the cam to the position that reduces the vibration.
What’s included
The kit is the rear cam bolt set only, with no other hardware included.









