Overview
The Pro Comp 20-65225 is a pair of rear adjustable cam bolts, also called alignment cams, that correct pinion angle. Pro Comp lists them for the 1997-2006 Jeep Wrangler (TJ) and the 2004-2006 Jeep Wrangler (LJ).
Pro Comp explains that alignment cams are used in the upper control arm of the Jeep TJ to adjust pinion angle, and that the adjustment helps eliminate driveline vibration. Pinion angle is the angle at which the driveshaft meets the axle pinion, and it often drifts after a suspension lift.
The cam bolts are used at the upper control arm, which is where pinion angle is adjusted on the TJ. Confirm which control arm location applies to your vehicle before installing.
After a lift, the angle between pinion and driveshaft often changes, which is a common cause of driveline vibration on TJs. Adjustable cam bolts let the owner correct the angle without changing the control arms.
Drivetrain vibration after a lift is a common complaint on TJs, and cam bolts are one of the least costly ways to address it.
Key features
- Adjustable cam bolts for pinion angle
- Helps eliminate driveline vibration
- Used in the upper control arm of the TJ.
- Supplied as a pair
- Direct fit
- Covers TJ and LJ Wranglers
Pinion angle basics
Pinion angle is the angle between the driveshaft and the axle pinion. A suspension lift shifts the axle, so the angle often drifts and can cause vibration that is felt most at highway speed. Adjustable cam bolts offer a way to correct the angle without changing the control arms, which keeps the rest of the front and rear suspension geometry intact.
Cam bolts work best when the rest of the driveline is sound. Check the universal joints, the transfer case output and the pinion yoke for play before adjusting, because worn joints can produce vibration that looks like an angle problem. Mark the cam position before changing it so you can return to the starting point if the result is not right.
- Check U-joints for play before adjusting
- Note the cam position before changing it
- Test drive across a range of speeds after each change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 20-65225 |
| UPC | 614901112092 |
| Product type | Adjustable alignment cam bolts |
| Purpose | Pinion angle correction |
| Quantity | Pair |
| Position | Front |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp Suspension 20-65225 includes: 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon); 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X).
The application is the 1997-2006 Jeep Wrangler TJ and 2004-2006 Jeep Wrangler LJ. YJ, JK and JL Wranglers are outside this application, so match your year, model and trim before ordering.
Installation notes
Pinion angle changes affect the driveline, so recheck for vibration on a test drive after adjusting the cams.
The cams replace the fixed bolts at the control arm, so the arm must be unloaded when the bolts are swapped. Measure pinion angle before and after, and tighten the cams once the angle is correct.
What’s included
- One pair of cam bolts, part number 20-65225












