Select your vehicle
-13%

Pro Comp Front Alignment Cam Bolts – 20-65227

Pro Comp Suspension

Shop Jeep Wrangler JK Pinion Angle Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front alignment cam bolts for Jeep JK, Pro Comp 20-65227
  • Fine tunes caster; helps diminish driveline vibration
  • For 2-door and 4-door models
  • Intended for 2-5 inch JK suspension lifts

Description

Overview

The Pro Comp 20-65227 is a set of front alignment cam bolts, also called cambolts, for the Jeep Wrangler JK, for both 2-door and 4-door models. They let an installer fine tune caster after a lift.

Pro Comp says lifted 2007 Jeep JK models can develop a steering shimmy from excessive rim and tire width or excessive caster. A front cambolt kit corrects the caster. The cam bolts replace the fixed, non-adjustable bolts that fasten the lower control arms to the axle, and Pro Comp says they should be recommended for any 2-5″ JK suspension lift.

Pro Comp adds that the rear pinion angle can be adjusted with a separate rear alignment cambolt kit to diminish driveline vibration further.

TJ owners will find the rear kit in the 20-65225 listing, while this front kit is for the JK. Matching the kit to the chassis avoids buying the wrong cam bolts.

The 2-5″ range named by Pro Comp covers most mild-to-moderate lifts.

Key features

  • Front cam bolts for caster adjustment
  • Fine tunes caster on lifted JK models
  • Replaces the fixed lower control arm mounting bolts at the axle
  • For 2-door and 4-door models
  • Intended for a 2-5″ JK lift
  • Helps diminish driveline vibrations

Caster and alignment after a lift

Caster is the forward or backward tilt of the steering axis, and it has a direct effect on steering stability at speed. After a lift, the geometry shifts and the factory setting may no longer suit the new height. Cam bolts let the installer move the lower control arm to bring caster back into range, which often reduces steering shimmy on taller trucks.

Wheel and tire size matter too. Wider or heavier wheels increase the load on the steering and can make an alignment that was acceptable before feel wrong. Recheck caster, camber and toe after any change to tires or lift height. Inspect the bolts, bushings and control arms during each alignment, and retighten fasteners to the specified values after a short drive.

Specifications

Brand Pro Comp Suspension
Part number 20-65227
UPC 614901116434
Product type Front alignment cam bolt kit
Purpose Caster adjustment
Position Front
Replaces Fixed lower control arm mounting bolts
Body styles 2-door and 4-door
Suggested lift 2-5″ JK suspension lift
Fit type Direct fit

Vehicle fitment

The Pro Comp 20-65227 fits the 2007-2018 Jeep Wrangler JK, in both 2-door and 4-door versions.

This kit is for the 2007-2018 Wrangler JK. The TJ, LJ, YJ and JL Wranglers are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the cam bolts take the place of the fixed lower control arm bolts, caster should be set and checked with an alignment after installation.

What’s included

  • Front alignment cam bolt kit, part number 20-65227
SKU: EXP20-65227 Category:

Specification

Shipping weight 1.20 lbs
Package dimensions 10.00 × 6.00 × 2.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK) likely fits2007–2018All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What does the Pro Comp 20-65227 do?

It is a front cam bolt kit that fine tunes caster. Fine tuning caster helps with steering shimmy on lifted JK models and can diminish driveline vibrations.

Which Jeep is the 20-65227 for?

It is for the 2007-2018 Jeep Wrangler JK, in both 2-door and 4-door versions. Both body styles are covered. Confirm your vehicle's year, model and trim before ordering.

Which bolts do the 20-65227 cam bolts replace?

They replace the fixed, non-adjustable lower control arm mounting bolts that fasten the lower arms to the axle. The cam bolts then allow caster to be adjusted.

Is the 20-65227 meant for lifted Jeeps?

Yes. Pro Comp says front cambolt kits should be recommended to anyone installing a 2-5" JK suspension lift. The range given covers mild lifts.

Do cam bolts need to be replaced when tires are changed?

Not always, but the caster setting should be checked whenever tire size or wheel width changes. Larger tires and wheels can change steering effort, so a new alignment after the change helps. Inspect the cam bolts and their threads at each alignment.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Pinion Angle Kits on Amazon