Overview
The Skyjacker CAM700 is a pinion cam bolt kit for the Jeep Wrangler, sold as a pair, for front lower or upper rear positions. Confirm fit for your vehicle’s year, model and trim before ordering.
Fitment is shown for both the 1997-2006 Wrangler TJ or Unlimited and the 2007-2018 Wrangler JK, so the year and generation of your vehicle must be confirmed before choosing this kit.
The kit comes with two bolts with cam washers, plus two more cam washers and two nuts. Cam bolts let an installer rotate the cam to move an axle mounting point slightly, which is how pinion angle is corrected.
Cam bolts let an installer rotate the cam to shift the axle end of a control arm slightly. On a lifted Jeep, that adjustment brings the pinion angle back toward the driveshaft angle.
Installers using this kit should measure pinion angle both before and after adjustment, then confirm the choice with Skyjacker.
Key features
- Pinion cam bolt kit, supplied as a pair
- Two bolts with cam washers
- Two additional cam washers and two nuts
- Front lower or upper rear position
- Intended for 1997-2006 Wrangler TJ or Unlimited vehicles
- Direct fit
Pinion angle and cam bolts
Pinion angle is the angle of the differential pinion relative to the driveshaft. When a lift raises the axle, that angle can change enough to cause driveline vibration, so an adjustment is often needed to bring it back into a workable range. Cam bolts move the axle mounting point slightly, which is the adjustment they make.
Measure pinion angle before and after each change, and make small adjustments rather than large swings. Driveline vibration at highway speed often signals an angle problem, but worn u-joints can produce similar symptoms, so inspect them too.
Cam bolts are most useful when they are part of a complete lift setup. Check the control arm bushings, the driveshaft length and the brake lines when the axle moves, and recheck the adjustment after the first few drives.
- Measure pinion angle before adjusting
- Inspect u-joints for play
- Recheck bolts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | CAM700 |
| UPC | 80369619427 |
| Product type | Pinion cam bolt kit |
| Quantity | Pair |
| Position | Front lower or upper rear |
| Hardware | 2 bolts with cam washers, 2 cam washers, 2 nuts |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Skyjacker CAM700 includes: 2007–2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X).
The 2007-2018 Wrangler (JK) is covered in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in both two-door and Unlimited versions. Other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cam bolts replace the stock bolts at the control arm, so unload the suspension first. Because the fitment data conflicts, confirm the arm size on your Wrangler before installing.
What’s included
- Two bolts with cam washers
- Two cam washers
- Two nuts









