Overview
The Pro Comp 3.5 Inch Lift Kit with Pro Runner Shocks, part number K3100BP, is a coil spring lift kit for the 4-door 2007–2018 Jeep Wrangler JK. It provides a 3.5 inch lift and clears 35 inch tires.
The kit is set up for on-road ride comfort and off-road clearance for 35 inch tires. It includes front and rear adjustable Chromoly trac bars with heim joints to center the axle and allow flex, plus brake line brackets. The Pro Runner shocks are nitrogen gas pressurized, with a brushed and zinc-plated, clear coated body.
Key features
- 3.5 inch lift stage 1 using front and rear coil springs
- Front and rear Pro Runner shocks included
- Front and rear adjustable Chromoly trac bars with heim joints
- Brake line brackets included
- Max tire size 35×12.50; wheel size range 16 inch or larger
- Includes all necessary hardware
- Nitrogen gas pressurized shocks dissipate heat more efficiently
Tire fit and axle control
Larger tires put more load on the drivetrain and suspension, so a lift that clears 35 inch tires also changes how the axles move. Trac bars control axle position under acceleration and braking, and they reduce wheel hop off road. Heim joints allow movement without binding as the suspension flexes.
Tire rub is most often seen at full steering lock and at full compression. Check clearance at both points after installation, and recheck it once the tires have seated. Wheel backspacing and offset influence how close the tire sits to the body and brake hose.
Off-road use adds stress to joints and fasteners. Joints should be inspected at each service and after rough trips, since play or binding shows the wear has begun.
- Check brake hose length with the wheels turned
- Confirm tire rub point at full compression
- Inspect trac bar heim joints for play
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K3100BP |
| UPC | 70000704098 |
| Product type | Suspension lift kit |
| Lift kit | 3.5 inches stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Front and rear lift | Coil springs |
| Shocks | Front and rear Pro Runner |
| Max tire size | 35×12.50 |
| Wheel size range | 16 inch or larger |
| Hardware | All necessary hardware included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 4-door 2007–2018 Jeep Wrangler JK.
This kit is for the 4-door JK. Confirm your body style, year and trim before ordering.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to its specification and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
What’s included
Front and rear coil springs, front and rear Pro Runner shocks, front and rear adjustable Chromoly trac bars with heim joints, brake line brackets and all necessary hardware.






























