Overview
The Pro Comp K5151B is a Pro Runner long travel suspension lift for the Toyota Tundra. The system provides 14 inches of total travel, a 5-inch track width increase and ride height increased by 3 to 4 inches, with ductile cast iron upper and lower extended A-arms at the core of the design.
Oversized OE-style pivot bushings are designed to keep noise and vibration close to factory levels. Extended length tie rod ends and CV axles are fitted for the wider track, and the kit is sold without shocks.
Key features
- 14-inch total travel
- Ductile cast iron extended A-arms, upper and lower
- Oversized OE-style pivot bushings
- Forged tie rod ends
- 5-inch track width increase
- Lift shackle and add-a-leaf mini pack
Planning the install
A long travel system is a bigger project than a basic lift. Before the arms go on, decide how the truck will be used: rock crawling, desert running or mostly highway driving each put different demands on shocks, bushings and steering. Plan the budget and time for the shock package, alignment and fender work together.
Track width changes affect steering and tire wear. A wider stance can change scrub radius and tire loading, so check for rubbing and uneven wear once the truck is back on the road. Re-torque lug nuts after the first drive, and keep the spare wheel and jack ready on longer trips.
Pivot bushings and tie rod ends take the most load on a setup like this. Grease fittings where fitted, check boots and seals, and replace any joint that feels loose before it becomes a steering problem.
- Shocks sized for the new travel
- Alignment done after the install
- Fender clearance checked at full articulation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5151B |
| UPC | 700007365511 |
| Lift height | 4 inch (ride height increased 3 to 4 inches) |
| Total travel | 14 inch |
| Track width increase | 5 inch |
| Rear wheel spacers | 2 inch |
| Shocks | Sold separately |
Vehicle fitment
It is offered for the Toyota Tundra. Confirm fit for your vehicle’s model year and trim before ordering.
Confirm the model year and trim of your Tundra before ordering, since the fender modification and tire clearance depend on the truck. The fitment is not confirmed for a specific year here.
Installation notes
Fender modification, both internal and external, is required to reach 14 inches of travel with 35-inch tires. Plan for that work and for an alignment check after the track width change.
What’s included
The kit includes the extended A-arms, forged tie rod ends, extended length tie rod ends, CV axle components, the lift shackle, the add-a-leaf mini pack, and 2-inch rear wheel spacers. Shocks are sold separately.




























