Overview
The Pro Comp 914580B is a PRO-X twin tube shock absorber for the 1999–2003 Chevrolet Silverado 1500 and GMC Sierra 1500, and for the 2001–2003 Silverado and Sierra 1500 HD. It has a 15.6-inch extended length and a 10.5-inch collapsed length.
The PRO-X is a general-purpose twin tube shock for trucks that spend most of their time on pavement with occasional off-road use. Pro Comp uses 10-stage velocity sensitive valving to handle different road surfaces, a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft.
This version has a stem upper mount and a clevis lower mount, which is a different lower end from the loop-style mounts on several other PRO-X shocks. The body is black powder coated and nitrogen stabilized, and the optional boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Clevis lower mount
- Black powder-coated finish
Before you buy
Clevis lower mounts pin the shock through a fixed bracket, so the joint moves in one plane and the shock body stays aligned with the arm. That makes the bracket condition more important than on loop-style shocks, where a bushing can absorb small misalignments. Measure the bracket hole spacing and pin size before buying, and check the axle bracket for bends or enlarged holes.
A shock change is a good time to inspect the stem upper mount, the bump stops and the springs. Worn bump stops can let the axle contact the frame, and a sagging spring changes the working length of the shock. Replace shocks in matched pairs on the same axle so damping stays even across the truck.
- Inspect the clevis pin and retaining hardware
- Look for cracked or bent brackets
- Check bump stops during the same job
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914580B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 15.6 in |
| Collapsed length | 10.5 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Clevis |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1999–2003 Chevrolet Silverado 1500 in the Base, LS, LT, SS and WT trims, the 2001–2003 Silverado 1500 HD in the LS and LT trims, the 1999–2003 GMC Sierra 1500 in several trims including the SLE, SLT and Denali, and the 2001–2003 Sierra 1500 HD in the SLE and SLT trims.
Silverado and Sierra models from 2004 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock has a clevis lower mount and a stem upper mount, so it does not swap directly with loop-style shocks. Check the 15.6-inch extended length against your installed ride height and confirm the clevis lines up with the axle bracket.
What’s included
One twin tube shock with its clevis lower mount. The optional boot is not included.
Not included: the optional boot, plus any hardware needed for the mounts.













