Overview
The Pro Comp Pro Runner ZX2116 is a front nitrogen gas charged monotube shock for the 2014 to 2018 Ram 2500 and 3500. Pro Comp designs it for a vehicle with a 6-inch lift.
Nitrogen pressure in the monotube body helps prevent cavitation during compression and rebound. This lets the shock shed heat more efficiently than a twin tube design. The ride tuning was developed through dyno and real-world testing, and the multi-stage valving is set for each application.
A twin tube shock keeps the oil and damping valves in one working cylinder inside an outer tube. A monotube uses a single tube with a floating piston that separates the gas from the oil, which is why the monotube body sheds heat more efficiently.
Key features
- Nitrogen gas charged monotube body
- 2-inch diameter body
- Multi-stage valving tuned to the application
- Brushed and zinc-plated body with a clear coat finish
- Rubber bushing and black polyurethane shock boots included
- Vehicle-specific ride tuning from dyno and real-world testing
Front shock maintenance
Front shocks handle steering and braking loads as well as bumps, so they wear differently from the rear. Look for oil on the shock body, a loose feel through the steering wheel and uneven front tire wear. Noise from the front end over small bumps can also point to worn bushings or mounts.
A front shock works alongside the control arms, steering components and springs, so a worn part elsewhere can speed up shock wear. Inspect the boots for tears and keep dirt off the shaft. Shocks replaced side by side keep steering response balanced.
- Check the upper and lower mounts for play
- Look for cracked or torn boots
- Inspect the control arm bushings during the same check
- Re-check fasteners after the first hard drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2116 |
| Shock series | Pro Runner |
| Position | Front |
| Charge | Nitrogen gas charged |
| Body diameter | 2 inches |
| Lift height | Designed for a 6-inch lift |
| Finish | Brushed and zinc-plated, clear coat |
| Included | Rubber bushing, black polyurethane shock boots |
| Warranty | True lifetime, 100% transferable; 90-day ride guarantee |
Vehicle fitment
This front shock covers 2014 to 2018 Ram 2500 and 2014 to 2018 Ram 3500 trucks.
It does not cover the Ram 1500 or other Ram model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is designed for a 6-inch lift, so check your lift height before ordering. Pro Comp designs these shocks to pair with its Pro Runner control arms, which are a separate product.
What’s included
One front monotube shock with a rubber bushing and black polyurethane shock boots.
Not included: the Pro Runner control arms.


















