Overview
The Pro Comp PRO-M Monotube Rear Shock Absorber, part number PR2131, is a gas charged monotube rear shock for trucks with a 6-inch lift. It fits the 2017 to 2021 Ford F-250 Super Duty and F-350 Super Duty.
The PRO-M is built for off-road use and a smooth ride on the road. An internal floating piston separates the oil from the nitrogen gas charge, which helps prevent cavitation, and the multi-stage valving is tuned for each application. The shock uses a 2.0 shock body for more oil capacity, and the wiper seal is designed to prevent leaks.
The shock is sold individually. Its valving is vehicle specific, and the multi-stage disc pack and nitrogen gas charge work together as one damping design. The wiper seal is designed to help keep the shock from leaking.
Key features
- Monotube design with an internal floating piston
- Nitrogen gas charge
- Multi-stage valving
- Vehicle specific valving
- Multi-stage disc pack
- 14mm chrome hardened shaft
- Wiper seal design
- Polyurethane shock boot included
Before you buy
Heavy-duty trucks with a lift often carry more weight and see more heat, so a rear shock is asked to do a lot of work. Confirm the lift height and the mount style before buying, since those two factors decide whether the shock will reach its full range without stress. Measure the current shock at both extremes of travel.
Good habits extend shock life. Wipe the shaft after muddy or wet trips, check the boot for tears, and look for oil residue around the wiper seal. A shock that feels loose, bounces after a dip, or leaks should be replaced rather than repaired in the field. Inspect the mounting hardware on every service and replace worn bushings with the shock when needed.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2131 |
| Shock series | PRO-M |
| Shock type | Monotube |
| Location | Rear |
| Extended length | 33.9 inches |
| Collapsed length | 20.7 inches |
| Upper mount | Loop in the short details; eyelet in the detailed specs |
| Lower mount | Loop in the short details; eyelet in the detailed specs |
| Gas charge | Nitrogen |
| Shaft | 14mm chrome hardened |
| Finish | Silver powder coat |
| Shock boot | Polyurethane, included |
| Fitment label | Direct Fit |
Vehicle fitment
It fits the 2017 to 2021 Ford F-250 Super Duty and F-350 Super Duty. Ford models outside those years and the F-450 are not covered.
It is designed for trucks with a 6-inch lift, so confirm your lift height before ordering. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The mount style is given two ways: loop in the short details and eyelet in the detailed specifications. Check the mount style against your vehicle before installing.
What’s included
One PRO-M rear shock with a polyurethane shock boot.









