Overview
The Pro Comp 927710B is a PRO-X twin tube shock absorber for the 2005–2015 Toyota Tacoma in the Base, Pre Runner, TRD Pro and X-Runner trims. It has a 27.7-inch extended length, a 16.2-inch collapsed length and an 11.4-inch travel length, which makes it a long-stroke rear shock for a midsize pickup.
The PRO-X is a general-purpose twin tube design for trucks used mostly on pavement, with occasional off-road driving. It uses 10-stage velocity sensitive valving to cover a range of road conditions, paired with a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft. It includes a Teflon rebound stop, which is designed to support a comfortable highway ride.
The shock has a stem upper mount and a loop lower mount, a 2.0-inch body diameter and a black powder-coated finish. The gas charge is nitrogen stabilized, and the optional shock boot is sold apart from the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Stem upper mount
- Black powder-coated finish
Before you buy
Shock absorbers control how quickly the spring compresses and rebounds, so a replacement should match how the truck is used. Twin tube designs like this one handle everyday pavement driving well, and the nitrogen charge helps keep damping steady as the shock heats up on longer drives. Think about how much of your driving is on rough trails before choosing between a general-purpose shock and a heavier-duty one.
Rear shocks wear out gradually. Look for fluid seeping from the body, a bounce that continues after a bump, or uneven rear tire wear. Replacing a worn shock in pairs keeps both sides matched, and it is worth checking the bushings and mounts at the same time, since loose hardware can mimic a failing shock.
- Check for oil on the shock body
- Note any rear bounce after bumps
- Inspect bushings and mounts when replacing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 927710B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Position | Rear |
| Extended length | 27.7 in |
| Collapsed length | 16.2 in |
| Travel length | 11.4 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 2005–2015 Toyota Tacoma in the Base, Pre Runner, TRD Pro and X-Runner trims.
Tacoma models before 2005 and after 2015 are not on this list, and other Toyota trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and loop lower mount should be checked against the existing Tacoma brackets before installation. Compare the 27.7-inch extended and 16.2-inch collapsed lengths with the installed ride height, and check clearance at full compression.
What’s included
One rear twin tube shock with a stem upper mount and loop lower mount. The boot is sold apart from the shock.
Not included: the optional boot.









