Overview
The Pro Comp Suspension ZXR255000 is a driver side front coilover shock with a remote reservoir for the 2007 to 2021 Toyota Tundra. It is a 2.5-inch monotube shock from the Pro Runner series, and its design is intended to perform better than traditional twin tube hydraulic shocks.
The shock body is nitrogen gas charged, which Pro Comp says prevents cavitation during compression and rebound. The external reservoir adds fluid capacity and helps the shock shed heat, which reduces shock fade on long runs.
Key features
- Monotube shock body with an external remote reservoir
- Nitrogen gas charged to limit cavitation
- Multi-stage valving for ride quality and handling
- Vehicle specific tuning, which Pro Comp says was developed on a dyno and in real-world testing
- Brushed, zinc plated, clear coated body
Reservoir shocks and heat
A monotube shock with a remote reservoir separates the gas and oil from the main body, which gives the shock more room to move fluid during long compression strokes. On a truck driven hard over rough ground, that extra room helps keep damping steady, because heat builds up quickly when the shock works through repeated bumps. Setting the reservoir where air can reach it is part of how the heat is shed, so avoid pressing it against a frame rail or the inner fender.
Front shocks are often replaced in pairs, since a new shock on one side and a worn one on the other can make the truck feel uneven through corners and on washboard roads. When the old unit comes off, check the upper and lower mounts, the bushings and the reservoir fittings for cracks or seepage. A clean, dry reservoir after a long run is a good sign the seals are holding.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZXR255000 |
| Shock series | Pro Runner |
| Body diameter | 2.5 in |
| Shock type | Coilover, monotube with reservoir |
| Position | Front left (driver side) |
| Charge | Gas charged |
Vehicle fitment
It fits the 2007 to 2021 Toyota Tundra, including the Base, SR5, Limited, Platinum and TRD Pro models.
It does not fit the Tacoma, 4Runner or other Toyota trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The external reservoir needs planning before the shock goes in, so decide where it will mount and how its line will run. Keep the reservoir and line clear of the tire and steering components at full compression. It is a front left shock, so confirm the side and position before mounting.
What’s included
One driver side front coilover shock with remote reservoir under part number ZXR255000.

















