Overview
The Pro Comp PRO-M PR2006 is a gas charged monotube front shock absorber for trucks with a 4 to 6 inch lift. It is sold individually, with a 21.4 inch extended length and a 13.8 inch collapsed length.
A monotube design keeps the oil and the gas charge in a single tube, separated by the floating piston, which is the design Pro Comp uses for this shock.
It fits Chevrolet Silverado and GMC Sierra heavy-duty and classic trucks from 1999 to 2010. An internal floating piston separates the oil from the nitrogen charge, which helps prevent the cavitation that robs performance.
The PRO-M has multi-stage valving tuned to each application and a 2.0 inch shock body with more oil capacity for heat dissipation during off-road use. The wiper seal is designed to keep the shock from leaking, and the shock is built for off-road use with a smooth on-road ride.
Key features
- Monotube design with an internal floating piston
- Gas charged with nitrogen
- Vehicle specific valving and a multi-stage disc pack
- 2.0 inch shock body with added oil capacity
- 14mm chrome hardened shaft
- New wiper seal design
- Polyurethane shock boot included
- Silver powder coat finish
Choosing a replacement shock
A front shock controls how quickly the suspension compresses and rebounds, which affects steering feel, braking stability and tire contact on uneven ground. On a heavy-duty truck the front shocks work hard under load, so the design of the piston and valving matters as much as the length.
A monotube body keeps the oil and gas in one tube, which gives the shock a more consistent response as it heats up. When you compare options, look at the shock body size, the shaft diameter and the mount style, and match them to the existing hardware. A lift changes the angles at both ends, so the new shock should be checked at full compression and full extension before the truck is driven.
Front shocks often wear together with the bushings and the steering components, so inspect those parts while the wheel is off. Leaking oil, a clunk over bumps or uneven tire wear are common signs the old shock has lost damping.
- Check the mounting hardware and bushings during installation
- Recheck torque after the first few drives
- Inspect the boot for tears before storage or reinstall
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2006 |
| Series | PRO-M |
| Position | Front |
| Type | Monotube, gas charged |
| Extended length | 21.4 inches |
| Collapsed length | 13.8 inches |
| Upper mount | Stem |
| Lower mount | Loop (also called eyelet) |
| Shaft | 14mm chrome hardened |
| Body | 2.0 inch |
| Lift range | 4-6 inches |
| Finish | Silver powder coat |
| Sold | Individually |
Vehicle fitment
It fits Chevrolet Silverado and GMC Sierra trucks from 1999 to 2010, including the 1500 HD, 2500 HD and 3500 models and the 2007 classic versions, across several trims.
Confirm your vehicle’s year, model and trim before ordering, especially for standard Silverado 1500 and Sierra 1500 models.
Installation notes
The shock is built for a 4 to 6 inch lift, so confirm the lift height on your truck before ordering.
What’s included
One shock absorber, sold individually, with a polyurethane shock boot. Check the package contents against your installation before starting.









