Overview
The Pro Comp Suspension EXPPR2040 is a PRO-M monotube shock for the 2007 to 2018 Jeep Wrangler JK, in two-door and four-door models. It has an extended length of 26.5 inches and a collapsed length of 16.8 inches.
The shock is nitrogen gas charged and uses vehicle specific valving. Its wiper seal and floating piston keep oil and gas separated, which helps reduce leaks and cavitation.
Key features
- Monotube design with floating piston
- Nitrogen gas charged
- Vehicle specific valving on a multi-stage disc pack
- 14 mm chrome hardened shaft
- Wiper seal design
- Polyurethane boot included
Choosing front or rear position
Shocks on a Jeep Wrangler JK are sized for specific positions, and front and rear units have different mounting angles and travel. Confirm the position before buying so the new shock matches the axle it replaces. A mismatch can change how the suspension rebounds and can cause the boot to rub against the body or spring.
Once installed, move the suspension through a full compression and rebound cycle by hand and confirm nothing contacts the boot or the spring. Periodically check the eyelet bushings for wear, since a worn bushing lets the shock knock during off-road driving and can damage the mounting holes.
- Confirm front or rear position first
- Check eyelet bushings for play
- Replace the boot if it tears
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2040 |
| Shock series | PRO-M |
| Extended length | 26.5 in |
| Collapsed length | 16.8 in |
| Mounts | Loop, upper and lower (per the product specs) |
| Shaft | 14 mm chrome hardened |
| Finish | Silver powder coat |
| Boot | Polyurethane, included |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK, including the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X models in two-door and four-door bodies.
It is offered for both front and rear positions, so confirm which one you need before ordering. Confirm fit for your vehicle’s year, model and trim before ordering, including JL, TJ and LJ applications.
Installation notes
Before ordering, confirm the position, because this shock is offered for both front and rear applications. Compare the 26.5 inch extended and 16.8 inch collapsed lengths with the shock being replaced. Check the eyelet mounts against the JK’s existing hardware, and confirm the boot clears the body at full extension once installed.
The JK’s rear and front shocks sit at different angles, so check the mounting position against the factory brackets before fitting. Once installed, confirm the shock moves freely through full compression and rebound and that the boot does not contact the body or the spring.
Because the JK rear suspension moves through a long travel range, check the boot once the shock is at full extension so that it does not rub the body.
What’s included
One PRO-M monotube shock with polyurethane boot under part number EXPPR2040.









