Overview
The Pro Comp Suspension ZXR2123 is a front Pro Runner 2.0 reservoir shock for a Jeep Wrangler with a 2.5 to 3.5 inch lift. It fits the 2007 to 2018 Wrangler JK and the 2018 Wrangler JL Unlimited Moab.
The monotube body has an external reservoir for extra fluid capacity. A floating piston separates the oil and gas, which Pro Comp says prevents cavitation and improves damping control. The valving is multi-stage and tuned for lifted JK models.
Key features
- Monotube reservoir design for 2.5 to 3.5 inch lift
- External reservoir with increased fluid capacity
- Floating piston separates gas and fluid
- Multi-stage valving tuned for lifted JK ride and handling
- CNC billet aluminum clamp and lower mount
- 18 mm nickel chromium plated shaft
- Rubber bump stop on the shaft bottom
Choosing a reservoir shock
Remote reservoir shocks separate the fluid storage from the damper body, which gives the oil more room to cool under repeated hard use. On a lifted Jeep this matters most on long descents and in rocky terrain where the shock works continuously. The reservoir should be mounted with enough clearance from the steering, tie rod and frame so it does not contact anything as the axle articulates.
Because the reservoir sits in a separate line, check the hose or line fittings for seepage and keep them routed away from heat sources and moving parts. Pairing a reservoir shock with the correct bump stop and checking the upper and lower mounts after installation helps the suspension behave predictably over time.
- Inspect the reservoir line for rub marks
- Check clamp bolts after the first trail run
- Look for an oil film on the shaft or reservoir body
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPZXR2123 |
| Shock series | Pro Runner 2.0 Reservoir |
| Position | Front |
| Shock type | Monotube reservoir |
| Lift | 2.5 to 3.5 in |
| Shaft | 18 mm nickel chromium plated |
| Clamp and lower mount | CNC billet aluminum |
| Finish | Clear coated zinc brushed |
| Sold as | Individually |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK, including two-door and four-door models, and the 2018 Jeep Wrangler JL Unlimited Moab.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for TJ, LJ and other JL models.
The shock is a front monotube with a 2.5 to 3.5 inch lift rating. Because its body uses a CNC billet aluminum clamp and lower mount, check that the clamp bolts are seated flat and that the reservoir line is routed away from the steering components. Confirm the rubber bump stop on the shaft does not contact the body at full compression.
Keep the external reservoir and its line free of rub points so the damper keeps a steady feel over long trails.
What’s included
One front Pro Runner reservoir shock under part number ZXR2123.
















