Overview
The Pro Comp Suspension 57013BX-1 is a 2.5-inch PRO-VST front coilover shock designed for vehicles with 2 to 3.75 inches of lift. It fits the 2003 to 2024 Toyota 4Runner and the 2007 to 2014 Toyota FJ Cruiser.
The shock has a hard-anodized, thick wall, impact forged body. Its 17-4 PH stainless steel shaft is chrome plated for corrosion and abrasion resistance, and the valving is tuned for each vehicle.
Key features
- Designed for 2 to 3.75 inches of lift
- Hard-anodized, impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning
- 2.5-inch body diameter
Lift height and geometry
Lift changes the geometry of the front suspension, and a coilover designed for a particular lift range is part of that system. Caster, camber and steering feel all move as the height changes, so the front end should be checked with the truck at its normal ride height. Measure the existing lift before buying and again before installing.
The 4Runner and FJ Cruiser are often used off road, where bump stops, skid plates and bumper brackets can all sit close to a coilover body. Check clearance through full droop and full compression, and look for any rubbing on the frame. Keep a record of front height so later work can be compared against it.
- Measure lift before selecting a coilover
- Check clearance through full droop and compression
- Confirm alignment after installation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57013BX-1 |
| Shock series | PRO-VST |
| Position | Front |
| Shock type | Coilover |
| Body diameter | 2.5 in |
| Lift height | 2 to 3.75 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
Vehicle fitment
It fits the 2003 to 2024 Toyota 4Runner and the 2007 to 2014 Toyota FJ Cruiser, in several trims.
It does not fit the Tundra or other Toyota trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The 2 to 3.75 inch lift range is what this coilover is designed for, so confirm your lift height first. Coilover shocks carry the vehicle’s weight through the spring seat, so check the installed height after mounting. The valving is set for each vehicle, which is why the fit is limited to the 4Runner and FJ Cruiser.
Check the front suspension geometry after the coilover is in, because a lift of 2 to 3.75 inches changes the caster and the steering geometry. Confirm the coilover body is clear of the bumper brackets and the steering components through full droop and full compression.
What’s included
One front coilover shock under part number 57013BX-1.
















