Overview
The Pro Comp PRO-X Twin Tube Shock Absorber, part number 924573B, is a gas charged twin tube shock with an eyelet top mount, a stem bottom mount and a 24.5 inch extended length. It is a universal fit, so compare its lengths with your current shock before ordering.
The PRO-X is designed for vehicles that spend most of their time on paved roads with some off-road use. Its 10 stage velocity sensitive valving handles a range of road conditions and improves handling.
A 5/8 inch chrome hardened piston rod and a Teflon rebound stop support the comfortable highway ride Pro Comp describes. Compressed length is 14.8 inches, travel length is 9.61 inches and the body diameter is 2.0 inches.
The shock is a universal location and is sold individually, so a second shock for the other position is a separate order.
Key features
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Gas charged twin tube body, 2.0 inch diameter
- Eyelet top mount and stem bottom mount
- Sold individually; shock boots sold separately
Measuring before you buy
Because a universal shock is not tied to one vehicle, the measurements do the matching work. Measure the current shock from eye to eye at full extension and again at full compression. The difference between those two figures is the travel, and a replacement that is too short can limit droop and strain the mounts, while one that is too long can bind at the top of its stroke.
Mount type is the next check. An eyelet on top and a stem on the bottom need matching brackets, and adapter bushings may be needed on some trucks, so confirm the hardware before ordering. Gas charged shocks should be handled with care, since the charge is under pressure, and worn shocks are usually replaced in pairs on the same axle. Inspect the old shock for leaks, dents or a bent shaft before deciding it was the cause of the problem.
- Measure at both full extension and full compression
- Check the mount style at both ends
- Inspect bump stops and bushings when replacing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924573B |
| Shock series | PRO-X |
| Shock type | Twin tube |
| Extended length | 24.5 in |
| Compressed length | 14.8 in |
| Travel length | 9.61 in |
| Body diameter | 2.0 in |
| Top mount | Eyelet |
| Bottom mount | Stem |
| Charge | Gas charged |
| Location | Universal |
Vehicle fitment
It is a universal fit, so it is not matched to a specific year, make or model. Compare the 14.8 inch compressed and 24.5 inch extended lengths with your current shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The top and bottom mounts differ, with an eyelet on top and a stem on the bottom, so check the mount type on your vehicle first.
What’s included
One shock absorber. Not included: shock boots, which are sold separately.









