Overview
The Trail Gear 120087-KIT is a weld-in frame gusset built from 3/16 inch mild plate steel. Its 3 inch height and 3 inch width make it a small reinforcing plate for joints where a cross member or brace meets the frame.
It is a universal fit part, so it is not tied to a particular year, make, model or trim.
Key features
- Weld-in gusset for frame joints
- 3 by 3 inch plate profile
- 3/16 inch mild plate steel
- Trail Gear universal fit designation
Choosing a welder and process
A small plate like this is often welded with MIG or stick, and the choice depends on the welder’s experience and the frame material around it. Thin plate needs enough heat to fuse without burning through. Practice on scrap of similar thickness before welding the actual frame, and set up the machine to match the metal.
Welding technique also changes the outcome. Keep the gusset flush against the tube, use consistent travel speed and avoid stacking heat in one corner. A weld that looks good on the surface may still lack penetration, so cut a test piece if you are new to structural work.
- Use clean, bare steel at each contact point
- Weld both ends of the gusset in balanced passes
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 120087-KIT |
| UPC | 70000621455 |
| Material | Mild plate steel |
| Material thickness | 3/16 inch |
| Height | 3 inches |
| Width | 3 inches |
Vehicle fitment
It works across different frames, so placement is decided by the builder. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit and clamp the plate, then tack it at the corners before running full beads. Because this is structural steel welded to a frame, have a qualified fabricator review the joint if you are unsure.
What’s included
Confirm the contents on arrival against your installation before starting. Not included: frame tubing, cutting tools and welding wire.









